Curriculum vitae

Name  :           MOHAMMAD BIN ISMAIL

Gender  :           MALE

Date of Birth  :           26 JANUARY 1961

Nationality  :           MALAYSIAN

Marital Status  :           MARRIED

Tel  :

(Mobile) : +60197769976

(Office): +6075531503

(Fax):+6075566157

E-mail  :           mohammad@utm.my

Website  :           http://civil.utm.my/mohammad/

 

Expertise  :          Durability of Concrete, Corrosion of Reinforcement, Non Destructive Testing and Forensic Structural Engineering, Sustainable Construction Materials.

 

ACADEMIC QUALIFICATIONS

 

1998                           :          Ph.D. (Electrochemical Repair of Corrosion of Reinforcement in Concrete)

Aston University, Birmingham, United Kingdom

 

1990                           :          M.Sc. (Structural Engineering)

University of Liverpool, Liverpool, United Kingdom

 

1986                           :          B. Sc. (Civil Engineering)

University of Strathclyde, Glasgow, United Kingdom

 

1983                           :          Diploma (Civil Engineering)

Universiti Teknologi Malaysia Kuala Lumpur, Malaysia

 

AWARD AND HONORS RECEIVED

 

  1. 1974 – Federal Scholarship Rancangan Khas (Form 1-3), Federal Government

 

  1. 1978 – Federal Scholarship (Form 4-5), Federal Government

 

  1. 1980 – Federal Scholarship (Diploma Civil Engineering, UTM), Federal Government

 

  1. 1984 – Federal Scholarship (SLAB) (B.Sc. (Hons) Civil Eng.), Federal Government

 

  1. 1989 – Federal Scholarship (SLAB) (M.Sc. Structural Eng.), Federal Government

 

  1. 1990 – Certificate of Appreciation Majlis Latihan Vokasional Kebangsaan, Kementerian Sumber Manusia

 

  1. 1992 – Industrial Technology Development and Management Programme Training Award, Asia Development Bank

 

  1. 1994 – Federal Scholarship (SLAB) (Ph.D), Federal Government

 

  1. 2001 – Award for best Paper in National Journal, UTM

 

  1. 2002 – Bronze Medal at Expo Science and Technology 2002, Ministry of Science and Technology

 

  1. 2003 – Anugerah Khidmat Cemerlang 2002, UTM

 

  1. 2004 – Anugerah Jasabakti, UTM

 

  1. 2009 – Anugerah Khidmat Cemerlang 2008, UTM

 

  1. 6 July 11 – Award for article in Index journal 2010, UTM

 

  1. 13-15 September 2011 -Monitoring Corrosion of Reinforcement Bar Using Capacitor Sensor at different Concrete cover depth”, . National Seminar on Civil Engineering Research (SEPKA), Faculty of Civil Engineering, (Best paper), UTM FKA

 

  1. 3 July 12 – Award for article in Index journal 2011, UTM

 

  1. 3 July 12 – Award for academic quality 2011, UTM

 

  1. 28 November 2012 – Award for article in Index journal 2011, Construction RA

 

  1. 28 November 2012 – Award for best researcher 2011, Construction RA

 

  1. 28 November 2013 – Award for article in Index journal 2012, Construction RA

 

  1. 8 – 10 Mei 2014 – ITEX, Gold Medal, MOSTI

 

  1. 28 November – 1 December 2014 – SIIF, Gold Prize, Seoul International Invention Fair

 

  1. Anugerah Sanjung Budi, UTM, 2014

 

  1. Jun 15 – Award for article in Index journal 2014 CITRA KARISMA, UTM

 

  1. 26 April 15 – Best Pontoon Award, UTHM

 

 

PROFESSIONAL MEMBERSHIP / QUALIFICATIONS / RECOGNITION

 

  1. Member Board of Engineers Malaysia (BEM), 1986

 

  1. Member Malaysian Concrete Society (PERKOM), 1996

 

  1. Member of Malaysian Structural Steel Assoc. (MSSA), No.OM-0435, 2000

 

  1. Member of Pertubuhan Saintis Muslim Malaysia (PERINTIS), No.45, 2010

 

  1. Member Malaysian Society for Eng. & Tech. (mSET), No 557, 2010

 

  1. Member of Asia Concrete Federation (ACF), 2008

 

  1. Member American Concrete Institute (ACI) Ref No: 01225941, 2013

 

 

ADMINISTRATIVE EXPERIENCE
 
Faculty Level

 

  1. 1 February 2015 – now – Deputy Dean Research and Innovation, FKA, UTM.

 

  1. September 2009 – now – Committee, JAPNI-Faculty of Civil Engineering, UTM

 

  1. 23 July 2015 – Chairman Jawatankuasa Pelaksana Majlis Anugerah Kualiti dan Jamuan Aidil Fitri FKA 2014

 

  1. 1 September 13 – now – Head of Reserch Group Structural Assessment and Forensic Engineering (SAFE)

 

  1. September 2009 – 2010 – Deputy Chairman, Laboratory Faculty of Civil Engineering, UTM

 

  1. 1 January 2009 – 31 December 2010 – Committee Revising Undergraduate Laboratory Manual, Faculty of Civil Engineering

 

  1. 1 January 2008 – November 2009 – Technical Committee, APSEC 2009, Faculty of Civil Engineering

 

  1. September 2009 – 2010 – Chaiman Research Seminar (SEPKA), Faculty of Civil Engineering, UTM

 

  1. September 2009 – 2012 – Committee, Research and Publication, Faculty of Civil Engineering, UTM

 

  1. 2007 – 2008 – Committee Award of Vice Cancellor, Faculty of Civil Engineering

 

  1. 1 July 2000 – 2008 – Fellow Construction Technology and Management Centre (CTMC)

 

  1. 10 November 2003 – November 2005 – November 2007 – January 2008 – Head, Department Structures and Materials, FKA

 

  1. 22 January 2008 – Commmittee of promotion to DS 52 and DS 54 of Faculty of Civil Engineering

 

  1. 1 July 2000 – 2003 – Fellow Steel Technology Centre, FKA

 

  1. 25 – 26 Jun 2005 – Committee Member Karnival Sukan FKA

 

  1. 15 April 2000 – 14 April 2004 – Head Civil Engineering Material Laboratory, FKA

 

  1. March 2002 – 2003 – Task force committee construction of a New Block for FKA

 

  1. July 2001 – 2003 – APSEC 2003, Committee member

 

  1. 10 February 2001-2003 – Chairman, Committee of Image of Structural and Material Laboratory, JSB, FKA

 

  1. June 2001 – May 2002 – Task force committee Motivation Camp, Academic Staff FKA

 

  1. March 2002 – Task force committee for FKA Exhibition to celebrate 30 years of UTM

 

  1. Jun 2001-2002 – Head, Committee of Subject Design II SAA 4244

 

  1. May 2000-2002 – Chairman Revised Committee of Structures Laboratory Book, FKA

 

  1. January 2001 – Member Task Force, Preparing working paper for Research Faculty of Civil Engineering

 

  1. 14 – 23 May 2001 – Head of Department Structures and Materials (Acting), FKA

 

  1. Jun 2000 – 2001 – Member of Development and Infrastructure Committee, FKA

 

  1. April 2000 – Member Budget Committee FKA

 

  1. 21 Febuary – 3 April 2000 – Head, Civil Engineering Material Laboratory (Acting), FKA

 

  1. October – November 2000 – Head Survey Camp (year 2, FKA) at Lumut, Perak

 

  1. 11 October 2000 – Chairman Committee of drafting “fail meja” (working proses) of head of laboratory

 

  1. January 2000 – Technical Committee Pembelian Komputer Fakulti

 

  1. 15 October 1998 – 15 April 2000 – Networking Administrator Fakulti Kejuruteraan Awam

 

  1. February – April 1999 – Head Information Technology (acting) , Fak. Kej. Awam

 

  1. November 1999 – Committee Member “Task Force” Meneliti Keputusan Peperiksaan Fakulti

 

  1. December 1998 – Committee Member Pemikir Halatuju Fakulti Kej. Awam, Alor Gajah, Melaka

 

  1. September 1992 – Secretary of Seminar Non Destructive Testing on Concrete

 

  1. 1991 – APSEC 1991, Committee Member Seminar APSEC 91’

 

  1. October 1990 – Host to Dr. Paul Chess, visit to department

 

  1. July 1988 – Treasurer of “Short Course on Concrete Technology” FKA, UTM

 

  1. 1987 – Committee Member Penerapan Nilai-nilai Islam, Fak. Kej. Awam

 

  1. 1992 – Pro tem Committee STC (Steel Technology Centre), Fak. Kej. Awam

 

 

University Level

 

  1. 25 February 2009- now – Committee of Slope Stability and UTM Building, Pejabat Harta Bina UTM

 

  1. 2 December 2009 – Now – Expert Consultant on safety of Ibnu Sina building, UTM

 

  1. RMC Expert research evaluator panel, now

 

  1. 30 January 2008 – Panel of Evaluation of Application of Biasiswazah UTM, School of Postgraduate

 

  1. 7 – 8 Januari & 15-16 January 2008 – Academic Auditor, Audit Fakulti Kejuruteraan dan Sains Geoinformasi

 

  1. 7 – 8 December 2007 – Academic Auditor, Audit Fakulti Sains

 

  1. 7 – 8 December 2006 – Academic Auditor, Audit Fakulti Pentadbiran

 

  1. 1992 – Sub-Committee Department of Structures (informal) Pameran 88 Tahun UTM

 

OTHERS EXPERIENCE
NATIONAL COMMITTEE

 

  1. MOSTI Expert evaluator panel, 23 Nov. 2012 – now

 

  1. MQA Panel evaluator, 3 Sept. 2012 – now

 

  1. MQA Evaluation Panel Agency-Engineering (Penilai Agensi Kelayakan Malaysia bidang Kejuruteraan), 25 Aug. 2009 – now

 

  1. Editor Malaysian Journal of Civil Engineering, MJCE, 2012, ISSN 1823-7843

 

  1. Chief Editor Proceeding APSEC-ACEC 2015, ISBN 978-983-44826-7-1

 

  1. Chief Editor Proceeding APSEC-ICCER 2012, ISBN 978-983-44826-1-9

 

  1. Editor Global Journal Al Thaqafah, ISSN 2232-0474, E-ISSN 2232-0482

 

  1. Editor Journal QUEST RJ (Quaid-E-Awam University Research Journal of Science And Technology), ISSN 1665-8607, 10 Dec. 2007-now

 

  1. Examiner of Technician ‘Pengubal Soalan PTK Juruteknik SSM’ July 2003 – now.

 

  1. Industrial Technology Development and Management Programme Training (3 months) at Corrosion and Protection Centre, UMIST, June – August, 1992.

 

  1. Head Panel of Materials, Jun. 2012 – Dec. 2012.

 

  1. Technical Committee for Evaluation of IDB Tender, 30 June, 2004

 

 

INTERNATIONAL APPOINTMENT/COMMITTEE

 

  1. Jun 2013 – April 2016 – Chairman, 9th.Asia Pacific Structural Engineering and Construction Conference and 8th Asean Civil Engineering Conference (9th.APSEC & 8th.ACEC 2015)

 

  1. Jun 2010 – December 2012 – Chairman, Asia Pacific Structural Engineering and Construction Conference and 1st ICCER (8th.APSEC 2012 & 1st. ICCER), Surabaya, INDONESIA.

 

  1. Technical Committee, International Conference on Engineering SPACE UTM, Bung Hatta & Hawk University, 4 Mar. 2009
  2. 18 October 2004–November 2006 – Chairman, Asia Pacific Structural Engineering and Construction Conference (APSEC 2006)

 

  1. MOU, Prepare MOU with Yonsei University, Korea, Jul. 2008.

 

  1. Host to Visiting Professor, Dr. Delgado, Forest Research Centre, Philippines, 11th.–15th. Nov. 2007.

 

  1. Host to Visiting Professor, Dr. Ha-Won Song, Yonsei University, Seoul Korea, 13th.-15th. Aug. 2007.

 

  1. Host to Visiting Professor, Dr. Abbas Aminmansour, University of Illinois at Urbana-Champaign, USA, 8th.–14th. Jul 2007.

 

  1. Host to Visiting Professor, Dr. Gerard Van Erp, Executive Director Fibre Composites, Queensland, Toowoomba, Australia 20th. Aug. – 7th. Sept. 2006.

 

 

RESEARCH ACTIVITIES
RESEARCH PROJECT UNDERTAKEN

 

  1. Project Member, Kegunaan Pozzolana Tempatan Sebagai Bahan Gantian Separa Simen dalam Konkrit,. (Headed by) Dr. Salihuddin Radin Sumadi, Faculty of Civil Engineering, UTM – 1987-1990. Budget approved RM 15,000.00 (Vot 6004)

 

  1. Project Leader, Evaluation of an Old Bridges in Muar and Batu Pahat in the aspect of corrosion of reinforcement – 1992. Budget approved RM 60,000.00 (Vot 62011)

 

  1. Project Member, English for Civil Engineering Courseware on Concrete & Its Constituent,. (Headed by) Pn. Sarimah Shamsuddin Jabatan Bahasa Moden, Dept. of Modern Language, Faculty of Management, UTM – 1998-2000. Budget approved RM 15,000.00 (Vot 71296)

 

  1. Project Member, Corrosion Detection/ Monitoring Based on Flux Gate Magnetometer,. (Headed by) Dr. Rashdi Shah bin Ahmad, Fizik Department, Fakulti of Sains, UTM – 1999-2001. Budget approved RM 208000.00 (Vot 72218)

 

  1. Project Member, Risk-Based Structural Integrity Evaluation of Corroding Oil and Gas, (Headed by) Dr. Nordin Yahaya, Faculty of Civil Engineering, UTM – 1999-2001. Budget approved RM161,000.00 (Vot 72273)

 

  1. Project Member, Multiplexed Fibre Optics Bragg Grating sensors, (Headed by) Dr. Rosli Abd Rahman, Fizik Department, Fakulti of Sains, UTM- 1999-2001. Budget approved RM179,000.00 (Vot 72168)

 

  1. Project Leader, Development of an Intelligent Rating System for Maintenance of Marine Structures in Malaysia – July 2000 – Jun 2002. Budget approved RM 20,000.00 (Vot 71643)

 

  1. Project Leader, Development of a Rapid Electrochemical Technique to Stop Corrosion of Reinforcement – July 2001 – Jun 2003. Budget approved RM 112,575.00 (Vot 72337)

 

  1. Project Leader, Application of Solar Energy in Cathodic Protection – July 2001 – Jun 2003.

 

  1. Project Leader, Effectiveness of Joint System in Precast Building Construction – Sept. 2002 – 2004. Budget approved RM 25,000.00 (Vot Kementerian Perumahan)

 

  1. Project Member, “The Study of Properties of Defected Concrete After Repair”, (Headed by) Dr. Abd Latif Saleh, Faculty of Civil Engineering, UTM – May 04-April 05. Budget approved RM 28,500.00 (Vot 75106)

 

  1. Project Leader, Development of Fibre Optic Sensor to Study Durability Properties in Reinforced Concrete – Dis. 03 – 31 May 2007. Budget approved RM 204,440.00 (Vot 74222)

 

  1. Project Leader, Investigation on the Behaviour of Polymer-Modified Latex Concrete – 1 Sep.07 – 31 August 2009. Budget approved RM 100,000.00 (Vot 78189)

 

  1. Project Member, “Development of Polymer-modified Ferroconcrete”, (Headed by) Dr. Mohamed Abd Kadir Ismail, , Faculty of Civil Engineering, UTM – 1 August 07 – July 2009. Budget approved RM 102,000.00 (Vot 79165)

 

  1. Project Leader, Development of Embedded Mini Sensor for Monitoring and Assessing Reinforced Concrete Deterioration – 1 Aug 07 – 1 Dec 2009 – Apr. 2010. Budget approved RM 237,000.00 (Vot 79152)

 

  1. Project Leader, Assessment of Potential Alkali Aggregate reaction (AAR) of Granite Aggregare in Johor – 15 Nov 09-14 Nov 2011 – 14 May 2012. Budget approved RM 50,000.00 (Vot: 78508)

 

  1. Project leader, Evaluation of Polymer by-product as Additive in Concrete – 1 Apr 11 – 31 Mar 2013 – 31 Mei 2013. Budget approved RM 150,000.00 (Vot 00H78)

 

  1. Project Member, Portable Pipeline Soil Corrosion Integrity Assessment Device (POPIA). Headed by Dr. Norhazilan Mohd Nor – 1 Apr 11-31 Mar 2013. Budget approved RM 150,000.00 (Vot 00H38)

 

  1. Project Member, Carbon-based Nanocomposite for reinforcement of cementitious matrix. Headed by Dr. Zaiton Abd Majid – 1 Aug. 11 – 30 Jul.12. Budget approved RM226,200 (Vot 4H008)

 

  1. Project Leader, Development and properties of intelligent concrete-polymer composites containing local agricultural waste as fillers – 1 Nov 2013 -31 Dec 2014. Budget approved RM100,000.00 (Vot 03H35)

 

  1. Project Leader, Green inhibitor for corrosion of steel reinforcement in concrete – 1 Jan 2014 – 30 Dec 15. Budget approved RM239,000.00

 

  1. Project Leader, Green inhibitor for corrosion of steel reinforcement in concrete – 11 May. 14 -10 May. 14. Budget approved RM 77000.00 (Vot QJ130000.21A2.01E65)

 

  1. Project Member, Fast track construction of composite floor system with cold formed steel section – 1 April 2014. Budget approved RM50,000.00 (Vot PY/2014/02058)

 

 

 

FUNDAMENTAL RESEARCH GRANT SCHEME (FRGS FUND)

 

  1. Project Member, “Exploring New Concept of Producing High Strength High Performance Light-weight Concrete”, (Headed by) Dr. Redzuan Abdullah, Faculty of Civil Engineering, UTM – Jan 08 – Dis 08. Budget approved RM15,000.00 (Vot 78022)

 

  1. Project Leader, Synthesis of green nano particles using plant extract on corrosion inhibition of metals in corrosive media – 1 July 14-1 Jun 16. Budget approved RM106,000.00 (RJ130000.7809.4F528)

 

 

 

CONTRACT RESEARCH PROJECT UNDERTAKEN (Industrial Grant Scheme, (IGS))

 

  1. Project Leader, Development and Manipulation of Waste Paper Material into Construction Materials – 6 April 07-5 April 2009. Budget approved RM 200,000.00 (Vot 68701)

 

PATENT FILED/DISCLOSURE

 

  1. Head, Polymer – Modified Ferroconcrete – 16 May 2008. Patent No: PI 2008 1645

 

  1. Head, Rating System for Maintenance of Marine Structures © 2008 Universiti Teknologi Malaysia – All Right Reserved – 7 Aug. 2008.

 

 

 

TEACHING ACTIVITIES
Teaching at Postgraduate Level

 

Semester Sem Subject Code Subject Credit Hour Total
Sem Jul 99/00   MAW 1213 Advanced Concrete Technology 3 credit  
Sem Dis. 99/00   MAW 1213 & MID 1263 Advanced Concrete Technology 3 credit  
Sem Dis 00/01   MAW 1273/ MID 1133 Construction Technology 3 credit  
2001/2002- 2   MAW 1303 Analysis and Design of Marine Structures 3 credit  
    MAW 1213 Advanced Concrete Technology 3 credit  
2002/2003-2   MAW 1213/ MID 1263 Advanced Concrete Technology 3 credit  
2003/2004-2   MAB 1033 Structural Assessment and Repair 3 credits  
2004/2005-2   MAB 1033 & Structural Assessment and Repair    
    MAB 1093 Analysis and Design of Marine Structures    
6/1/2005   MAB 1153 Advanced Concrete Technology 3 credits  
6/2/2005   MAB 1033 Structural Assessment and Repair 3 credits  
7/2/2006   MAB 1033 Structural Assessment and Repair 3 credits  
8/1/2007   MAB 1093 Structural Assessment and Repair 3 credits  
    MAB 1033 Analysis and Design of Marine Structures    
8/2/2007   MAB 1093 Structural Assessment and Repair 3 credits  
9/1/2008   MAB 1033 Analysis and Design of Marine Structures 3 credits  
10/2/2009   MAB 1033 Structural Assessment and Repair 3 credits  
11/2/2010   MAB 1103 Structural Assessment and Repair 3 credits  
12/1/2011   MAB 1033 Financial Management 3 credits  
12/2/2011   MAE 1103 Structural Assessment and Repair 3 credits  
2012/13-1   MAB 1033 Experimental Methods 3 credits  
2013/14-2   MAB 1053 Structural Assessment and Repair 3 credits  
2014/15-1   MAB 1033 Advanced Concrete Technology 3 credits  
2014/15-2   UAPA0013 Structural Assessment and Repair 3 credits  
2015/16-1   UAPA 0013 Research Methodology 3 credits  
2015/16-2   MKAR 1013 Research Methodology 3 credits  
2015/16-2   MAKE 1033 Forensic Structural Engineering 3 credits  
2015/16-2     Structural Assessment and Repair 3 credits  

 

 

Teaching at Undergraduate Level, among others

 

Semester Sem Subject Code Subject Credit Hour Total
1983/84   SAA 2153 Lukisan Kejuruteraan 3 credit  
    SAW 2073 Bendalir (Tutorial) 3 credit  
1986/87   DAW 2122 Bahan Kejuruteraan Awam 2 credit  
1987/88   DAW 3144 Rekabentuk Struktur II 4 credit  
1990/91   DAW 3143 Rekabentuk Struktur I 3 credit  
1991/92   SAW 4243 Rekabentuk Struktur II 3 credit  
1992/93   DAW 3143 Rekabentuk Struktur I 3 credit  
1993/94   SAW 2222 Bahan Kejuruteraan Awam 2 credit  
1994/95   DAW 3143 Rekabentuk Struktur I 3 credit  
1998/99   DAW 3144 Rekabentuk Struktur II 4 credit  
    SAA 3243 Rekabentuk Struktur I 3 credit  
1999/2000   SAA 2222 Bahan Kejuruteraan Awam 2 credit  
    SAA 4052 Projek Amalan Profesional 2 credit  
    SAA 3243 / SZW 3243 Rekabentuk Struktur I 3 credit  
    SAA 4052 Projek Amalan Profesional 2 credit  
2000/2001 – 1 1 SAC 4344 Rekabentuk Struktur III 4 credit  
    SAA 3051 Makmal konkrit 1 credit  
    SAM 1412 Pengenalan kepada komputer 2 credit  
2000/2001 – 2 2 SAC 4244 Rekabentuk struktur II 4 credit  
    SAA 3051 Makmal konkrit 1 credit  
    SAA 4073 Kaedah Penyelidikan 3 credit  
2001/2002 – 1 1 SAA 4244 Rekabentuk Struktur II 4 credit  
    SAA 4414 Teknologi Pembinaan 4 credit  
2001/2002 – 2 2 SAA 4244 & SAC 4244 Rekabentuk Struktur II 4 credit  
    SAA 3051 Makmal konkrit 1 credit  
2002/2003 – 1 1 SAA 4244 & SAE 4244 Rekabentuk Struktur II 4 credit  
    SAA 4073 Kaedah penyelidikan 3 credit  
2002/2003 – 2 2 SAA 4244 & SZW 3153 Rekabentuk Struktur II 4 credit  
      Bahan Kejuruteraan Awam 3 credit  
2003/04 – 1 1 SAA 4244 Rekabentuk Struktur II 4 credit  
2003/04 – 2 2 SAM 4324 Rekabentuk Struktur Keluli dan Kayu 4 credits  
2004/05 – 1 1 SAM 4324 Rekabentuk Struktur Keluli dan Kayu 4 creditd  
    SAM 5062 Research Methodology 2 credits  
2005/06 – 1 1 SAM 4324 Rekabentuk Struktur Keluli dan Kayu 4 credits  
6/2/2005 1 SAM 4324 Rekabentuk Struktur Keluli dan Kayu 4 credits  
2006/07 – 1 1 SAM 4324 Rekabentuk Struktur Keluli dan Kayu 4 credits  
7/2/2006   SAB 3233 Rekabentuk Struktur Keluli dan Kayu 3 credits  
    SAM 5062 Research Methodology 2 credits  
8/1/2007   SAB 3233 Rekabentuk Struktur Keluli dan Kayu 3 credits  
    SAB 2112 Bahan Kejuruteraan Awam 2 credits  
8/2/2007   SAB 3233 Rekabentuk Struktur Keluli dan Kayu 3 credits  
    SAB 2112 Bahan Kejuruteraan Awam 2 credits  
9/1/2008   SAB 2112 Bahan Kejuruteraan Awam 2 credits  
    SAB 4022 Research Methodology and Pre-project 2 credits  
9/2/2008   SAB 4022 Research Methodology and Pre-project 2 credits  
2009/2010-1 1 SAB 2112 Civil Engineering Materials 2 credits  
2009/2010-2 2 SAB 2112 Civil Engineering Materials 2 credits  
2010/2011-1 1 SAB 2112 Civil Engineering Materials 2 credits  
2010/2011-2 2 SAB 4163 Concrete Technology 3 credits  
2011/2012-1 1 SAB 4163 Concrete Technology 3 credits  
2011/2012-2 2 SAB 4163 Concrete Technology 3 credits  
2012/2013-1 1 SAB 4163 Concrete Technology 3 credits  
2013/2014-1 1 SAB 4163 Concrete Technology 3 credits  
 ,,   SAB 2112 Civil Engineering Materials 2 credits  
2013/2014-2 2 SAB 4163 Concrete Technology 3 credits  
2014/2015-1 1 SAB 4163 Concrete technology 3 credits  
2014/2015-2 2  
2015/2016-1 1 SKAU 4163 Concrete Technology 3 credits  

 

 

Supervising Undergraduate Final Year Student Project

Teaching/Supervising Undergraduate Structural Laboratory

Teaching/Supervising Undergraduate Concrete Laboratory

Visiting Undergraduate undergoing Industrial training

Head survey camp

Supervise survey camp

Teaching and preparing questions for Technicians Examination

Facilitator SLAB Course 1999 (March 1999, 2000)

 

SUPERVISION
 
PhD Student
Year No. Name Status Title Roles of Supervision
Nov, 2000–04

 

1. SHAIFUL AMRI MANSUR Graduate June 2004 Productivity Assessment and Schedule Compression Index for Construction Project Planning Co-Supervisor
Nov, 2004–07

 

2. ABDULLAH SAAND Graduate March 2008 Repair and Strengthening of Reinforced Beams with Polymer Modified Mortar Main Supervisor
Sept. 2005 – 08 3. KAMARUL BADLISHAH BIN KAMARLZAMAN Not Complete Pengkarbonatan Konkrit – Analisis dan Kaedah Jangkahayat Struktur Akibat Kesan Pengkarbonatan Main Supervisor

Not complete

Dec 06–2009 4. BALA MUHAMMAD Graduate Nov. 2009 Impact of Natural Rubber Latex on Engineering Properties of Concrete Main Supervisor
Jan 2010-2013 5. SALAWU ABDULRAHMAN ASIPITA Viva 6-9-12

Graduate Oct 2012

Comparative Study of Green Corrosion Inhibitors of Steel Reinforcement in Concrete Main Supervisor
June 2010-2013 6. AINUL HAEZAH NORUZMAN On-going Behaviour and Application of Concrete with Waste Polymer Additive Main Supervisor
June 2010-2013 7. FARAHBOD MOHAMMADI Not complete Intelligent Decision Support System for Concrete Building Maintenance Co-Supervisor

Not complete

Oct. 2010-2013 8. MOHD AZRUL ABDUL RAZAK On-going Use of Nano Waste in Concrete Co-Supervisor
Nov. 2010-2013 9. PARHAM FOROUZANI Viva: 3-5-16

Graduate:

Development of waste tyre and palm oil fuel ash modified concrete – for sound insulation Main Supervisor
Jan 2011-2014 10. TALIAT YUSOF Viva: 11-3-15

Graduate Apr 2015

Impact of binary blend of metakaolin and palm oil fuel ash on engineering properties of geopolymer mortar Main Supervisor
April 2011 11. IBRAHIM HASSAN Viva 3-3-15

Graduate Apr 2015

Development of self consolidating high performance ternary blend concrete Main Supervisor
Sept. 2011 12. SEYEDMOJTABA GHOREISHIAMIRI On-going Corrosion Inhibitor effect on corrosion and durability of Structure Main Supervisor
Sept. 2012 13. NUR HAFIZAH BT. ABDUL KHALID Viva 2-11-15

Graduate 9 Nov 2015

Properties of micro polymer concrete containing palm oil fuel ash as filler Co-Supervisor
Oct. 2013 14. SEYED MEYSAM KHOSHNAVA Viva: 28-4-16

Graduate:

 

Green construction materials Main Supervisor
Nov. 2013 15. TAHA MEHMANNAVAZ Viva: 19-5-14

Graduate Aug. 2014

Characteristic of ferrocement sandwich aerated concrete wall elements incorporating pozzolanic waste materials Main Supervisor
Jan. 2014 16. MOHAMMAD ALI ASAAD ZEKI ALSAAD On-going Synthesis green nano particles using plant extract and its application on corrosive media Main Supervisor
Jul. 2014 17. EGBA, ERNEST ITUMA On-going Structural Damage Diagnosis and Prognosis Using Integrated ANFIS Interval Modelling Technique and NARX Network Main Supervisor
Feb. 2015 18. AKRAM On-going waste tyre and palm oil fuel ash modified concrete – for sound insulation Main Main Supervisor

 

 

Master by Research

 

Year No. Name Status Title Type Roles of Supervision
July 99 – Jul 01 1.             OOI SOON LEE Graduate Sewage Effluent as Mixing and Curing Water for Concrete Research Main Supervisor
Jul 2000 – 2002 2.             SALEHUDDIN SHAH BIN AYOP Graduate Development of an Intelligent Rating System for Maintenance of Marine Structures Research Main Supervisor
Jul 2000 –2002 3.             SIAW WAI SAN Graduate Measuring Durability Related Properties in Insitu Concrete Research Main Supervisor
June 2001 4.             SHAFIDAH BT. SAFIEI Not complete Development of Rapid Electrochemical Technique to Stop Corrosion of Reinforcement Research Main Supervisor

Not complete

July 2001 5.             MOHD SAIFUL RIZAL BIN YUSOFF Not complete Application of Solar Energy in Cathodic Protection Research Main Supervisor

Not complete

June 04–Ogo 06

 

6.             ERICA DINA Graduate 2006 Development of fibre optic sensor to monitor corrosion of reinforcement Research Main Supervisor
Jul 2007-Sept 2009 7.             LAU SIM KEOK Graduate Nov. 2009 Development of Waste Paper Materials into Construction Materials Research Main Supervisor
Jul 2008 8.             SITI FATIMAH BT. ABD RAHMAN Graduate 2012

 

Development of Capacitance Sensor to Measure Corrosion of Reinforcement Research Main Supervisor
Jul 2008 9.             NURUL AIN HANINA MOHAMAD FODZI Not complete Behaviour of Ferroconcrete as Repair Material Research Main Supervisor

Not complete

June 2010 10.           FARZANA AHMED Not complete

Terminate June 2011

 

Assessment of Potential Alkali Aggregate Reaction of Granite Aggregate in Johor Research Main Supervisor

Not complete

Oct. 2010 11.          AMIRULHAMZA HAMDAN Graduate March 2014 Paper Sludge Waste in Concrete Research Co- Supervisor
Sept. 2011 12.           MOHAMMAD AMIR BIN AZIZAN Not complete

 

Corrosion Detection using OTDR Research Main Supervisor

Not complete

 

Feb. 2012 13.          NURHIDAYAH RUSLAN Graduate

Jun 2014

Effect of Steel Slag and Steel Sludge on Concrete Properties Research Main Supervisor
Nov. 2014 14.          NURUL FADZILAH BINTI ABDUL PATTAH On-going Effects of the Antenna Polarization and the TargetMedium Dielectric Contrast on Ground Penetrating Radar GPR Signals from nonmetal pipes Research Co- Supervisor
Jan. 2016 15.          KHAIRUL ZAHREEN MOHD AROF On-going Tension Stiffening Properties in Oil Palm Empty Fruits Bunches Fibre Concrete Research Co-Supervisor
Master by Taught Course
Year No. Name Status Title Type Roles of Supervision
2000 1. Chan Hun Beng Complete Fire Damaged Structures Rebuilt or Reinstate – Factors for Decision Taught Course Main Supervisor
2005 2. Jayakumaran A/L Govindasamy Complete Effect of Overdose Admixture on Durability of Concrete Taught Course Main Supervisor
2005 3. Zuraimi Johari Complete Behaviour of Normal and High Strength Concrete Under Elevated Temperature Taught Course Main Supervisor
2006 4. Moumouni Moussa Idrissou Complete Reliability in Interpreting Non Destructive Testing Results of Concrete Structures Taught Course Main Supervisor
2006 5. Mohd Zaki Mokhtar Complete Kerosakan dan Kemerosotan Struktur Konkrit di Malaysia Taught Course Main Supervisor
2006 6. Aeinul Haezah Noruzman Complete Kesesuaian Pengunaan Air Sisa dalam Konkrit Taught Course Main Supervisor
2006 7. Alison Shreenawati Complete Effective Repair System for Corrosion of Reinforcement Taught Course Main Supervisor
2007 8. Chiong Chung Eng Complete Strengthening of Bolted Shear Joint in Ferrocement Construction Taught Course Main Supervisor
2008 9. Leena a/p Chelladurai Complete

 

Forensic Engineering Taught Course Main Supervisor
2009 10. Mohammad Ali Asaad Zeki Complete Effectiveness of cathodic protection in addressing corrosion of reinforcement Taught Course Main Supervisor
2010 11. Peyman Mahmoudian Jouneghani Complete Properties of Acrylic Polymer Concrete Taught Course Main Supervisor
2010 12. Raja Kumaran a/l Rajappan Graduate Structural Assessment and remedial work for LRT line Taught Course Main Supervisor
2010 13. Puteri Juieta Salwanni Md Yusof Graduate spalling of concrete of Kapar power plant Taught Course Main Supervisor
2010 14. Pui Yun Fatt Graduate May 2011 Management of Solid Waste for Concrete Additive Taught Course Main Supervisor
2010 15. Thayalan a/l Balakrishnan Graduate May 2011 Corrosion problem of reinforced concrete structures exposed to marine environment Taught Course Main Supervisor
2011 16. Hayati Md. Zin Graduate

June 2012

Structural Assessment of Jety, ‘Structural Condition Assessment of reinforced concrete jetty structure Taught Course Main Supervisor
2011 17. Mohd Shahnaz Sani Graduate

June 2012

Assessment of Reinforced Concrete Jetty Structure Exposed to Marine Environment Taught Course Main Supervisor
2012 18. Eyu Gaius Debi Graduate

Mar. 2013

Corrosion Inhibitor effect on concrete Taught Course Main Supervisor
2013 19. Musa Adamu Graduate

Mar. 2014

The use of scrap tyres as fine and coarse aggregates in concrete Taught Course Main Supervisor
2014 20. Gamal Maged Mohamed Graduate Self compacted concrete Taught Course Main Supervisor
2015 21. Lew Shong Wai On-going Fibre Optic Corrosion Sensor Taught Course Main Supervisor

 

 

POSTGRADUATE EXAMINATION /VIVA
UTM STUDENTS/VIVA

 

  1. Chairman of the PhD. Viva Panels for Ong Peng Pheng, UTM, 19 Apr 2016

 

  1. Chairman of the PhD. Viva Panels for Reni Suryanita, UTM, 8 Jun 2014

 

  1. Chairman of the PhD. Viva Panels for Reza Mahjoub, UTM, 23 Sept. 2013

 

  1. Chairman of the PhD. Viva Panels for Wai Soon Han, UTM, 21 Aug. 2013

 

  1. Chairman of the PhD. Viva Panels for Dzulkarnain bin Ahmad, UTM, 21 June 2013.

 

  1. Chairman of the PhD. Viva Panels for Lee Jin Hua, UTM, 2011

 

  1. Chairman of the PhD. Viva Panels for Ruzaina Ismail, UTM, 11 Sept. 2008

 

  1. Chairman of the PhD. Viva Panels for Amar Mohammed Salim Al-Ojaili, 17 Sept. 2007

 

  1. Chairman of the MSc. Viva Panels for Airil Yasreen Mohd Yassin, 5 Sept. 2002

 

  1. Chairman of the MSc. Viva Panels for Fatoni Usman, 28 Mar. 2002

 

  1. Chairman of the MSc. Viva Panels for Ahmad Mohammad Kamal, 25 May 2001

 

  1. Chairman of the MSc. Viva Panels for Mohamad Syazli Fathi, 29 Sept. 2000

 

 

PhD EXTERNAL EXAMINER

 

  1. MOHD SUHELMIEY SOBRI, Thesis: Structural Performance of Male-Female Interlocking Panel (M-FIP) Connection Using Crushed Concrete Waste Aggregate (ccwA), UiTM, 9 Mei 2016.

 

  1. JOHNSON OLUFEMI ADEBAYO, Waste Cooking Oil as a Sustainable Binder for Immobilization of Petroleum in Building Blocks, UTP, 11 Feb. 2016.

 

  1. SHILPA KULKARNI, Studies on Deinking Process And Utilization of Deinking Sludge, Indian Institute of Technology Roorkee Roorkee, INDIA, 9 Dec. 2015

 

  1. SADAQAT ULLAH KHAN, Development of High Strength Fibre Reinforced Concrete with Enhanced Ductility UTP (17 May 2015)

 

  1. KHAIRULLAH, Pemodelan Penarafan Keadaan Jambatan Berdasarkan Data Tahap Kerosakan Bahan Komponen Jambatan Yang Terhad, UKM (5 May 2015)

 

  1. HAIDER MOHAMMED OWAID, Engineering Properties, Durability and Micro Structures of Multiple Blended Binders Concretes Incorporating Thermally Activated Alum Sludge Ash, UKM (16 Mar. 2015)

 

  1. AHMAD FATHI MOHAMED SALIH, Performance of fiber reinforced self-compacting concrete (FRSCC) containing different pozzolanic material, UTP (8 Dec. 2014)

 

  1. Sridhar J, Effect of Steel Slag Replacement as Fine Aggregate in Ferrocement Laminates for Flexural Strengthening of RC Beams ANNA University, India (29 Feb. 2014)

 

  1. MST SADIA MAHZABIN, Optimization of Wood Fibre Cement Composite Properties for Application as Load Bearing Wall Panel, UKM (5 Dec. 2013)

 

  1. PAYAM SHAFIQH, Mechanical Properties of High Strength Lightweight Concrete Containing Oil Palm Shell, UM (3 Jan 2013)

 

  1. MARTIN KHAIRUL FATAH, Mechanistic and Kinetic Studies of Microbiologically Influenced Corrosion (Mic) in The Presence of Dominant Sulphate Reducing Bacteria (Srb) Metabolic Species, UTP (3 Dec. 2012)

 

 

MSc EXTERNAL EXAMINER

 

  1. NUR AZZIMAH BINTI ZAMRI, Mechanical and Durability Properties of Oil Palm Shell Lightweightaggregate Concrete Containing Palm Oil Fuel Ash as a Partial Cement Replacement, Universiti Malaysia Pahang, 24 April 2015

 

  1. IZZUDIN BIN KHAIRUL ANNUAR, Electrochemical Noise Technique in Monitoring Carbon Dioxide Corrosion in High Pressure and High Temperature Environment, UTP, 7 April 2014

 

  1. NORZAIREEN MOHD AZMEE, Effect of Microwave Incinerated Rice Husk Ash (MIRHA) and Flv Ash on The Propedies of Ductile Self-Compacting Concrete (DSCC), UTP, 4 Feb. 2014

 

  1. ANIS AMILAH, Elucidating Corrosion Mechanism of Preferential Weld Corrosion in Carbon Dioxide Environment, UTP, 7 Sept. 2012

 

  1. MOHAMMED JASSIM ABED, Repair Effectiveness of Damaged RC Beams With Circular Web Opening Using CFRP and Steel Plates, UNITEN; 15 Aug. 2012.

 

  1. MUHAMMAD ASHIQUR RAHMAN, Eliminating premature shear failure in carbon fibre reinforced polymer laminate flexurally strengthened reinforced concrete beams. UM, 8 Aug. 2012.

 

  1. RIKKI VITRIA, Civil Eng. Pengesanan Retakan Berasaskan Frekuensi Asasi Dalam Spesimen Rasuk Konkrit Melalui Sambutan Dedenyut Impak Berbilang, UKM, 23 Apr. 2012

 

  1. MARYAM QAYS OLEIWI. Assessment of Industrialized Building System Construction in Malaysia, UNITEN, 8 Feb. 2012.

 

  1. SAGAR DAS, Civil Eng. Algorithms for Automatic Detect Identification of Plate Structures in Impact Echo Assessment, UKM, 31 Mac 2010

 

  1. ABU SUFIAN B. MD. ZIA HASAN, Dynamic Behaviour Simulation of High Performance Concrete, UKM, 23 April 2009

 

 

MSc INTERNAL EXAMINER

 

  1. LIM KAR SING Corrosion Study on X70-Carbon Steel Material Influenced by Soil Engineering Properties, UTM, 27 Sept. 2012.

 

  1. NOR APAZIAH NOR OZMAN, Seamless Integrated Approach of Corroding Pipeline Assessment, 24 Nov. 2011.

 

  1. SHADIAH HUSNA MOHD NOR, Statistical Modelling of Corrosion Pit in Liquid Containment Structures, 21 Jul. 2011.

 

  1. NORHAZILAN MD. NOR, Risk-Based Assessment of Corroding Oil and Gas Pipelines, 7 Aug.2002.

 

  1. Arreshvhina a/l Narayanan, 9 Oct.2002

 

 

 

PhD INTERNAL EXAMINER
  1. ARMAN BIN ABDULLAH, Development of External Corrosion Growth Model for Buried Steel Pipeline Exposed to Sulphate Reducing Bacteria, UTM, 10 Mei 2015.

 

  1. SITI RABE’AH BINTI OTHMAN, Modelling of External Corrosion Growth of Steel Pipelinws In Soils, 7 Sept. 2015

 

  1. MAZURA MAT DIN, Computational Reliability Assessment of Offshore Pipeline 26 April 2015

 

  1. AHMED MOKHTAR ALBSHIR BUDIEA, : Integrity Prediction of Corrosion Pipelines Under Seabed Sediment, 13 Jan. 2015

 

  1. MA CHAU KHUN, Structural Behaviour of Slender High-Strength Concrete Column Confined with Lateral Pre-Tensioning Steel Straps Confinement, 30 Oct. 2014

 

  1. SHEHU IBRAHIM ABUBAKAR, Performance evaluation of concrete containing high volume palm oil fuel ash, 27 April 2014

 

  1. MOHD AZREEN MOHD ARIFFIN, Engineering properties of durability performance of geopolymer concrete using blended ASH from Agro-Industrial Waste, 31 Dec. 2013

 

  1. ABDULLAH ZAWAWI AWANG, Structural Behaviour of High-Strength Concrete Column Confined with Lateral Pre-Tensioning Steel Straps, 10 Jul. 2012.

 

 

 

PUBLICATIONS

 

JOURNAL
ISI Journal :

 

  1. A. Mansur, M. Maalej and Mohammad Ismail, “Study on Corrosion Durability of Ferrocement”, ACI Material Journal Vol 105, No 1, pp 28-34, Jan-Feb. 2008. (IF 0.568).

 

  1. Mohammad Ismail, Bala Muhammad and Mohamed ElGelany Ismail, ‘Compressive Strength Loss and Durability Degradations of Reinforced Concrete Structure due to Long –term Exposure’, Construction and Building Materials, Vol 24 No 6 pp 898-902, 2010. (IF 1.456).

 

  1. Mohammad Ismail and Esah Hamzah, ‘Corrosion Performance of Dual-Phase Steel Embedded in Concrete’, Arabian Journal for Science and Engineering Vol 35, 2B, pp81-90, Oct 2010. (IF 0.106).

 

  1. Mohammad Ismail, M.E. Ismail and Bala Muhammad, ‘Influence of Elevated Temperatures on Physical and Compressive Strength Properties of Concrete Containing Palm Oil Fuel Ash’, Construction and Building Materials Vol. 25 No. 5 pp 2358-2364, 2011. (IF 1.456).

 

  1. Bala Muhammad, Mohammad Ismail, Yussuf A.A., Muhammad A.R.B. ‘Elastomeric Influence of Natural Rubber Latex on Cement Mortar at High Temperatures using Thermal Degradation Analysis, Construction and Building Materials Vol. 25 No. 5 pp. 2223-2227, 2011. (IF 1.456).

 

  1. Abdulrahman, A.S., Ismail, M., Hussain, M.S.Corrosion inhibitors for steel reinforcement in concrete: A review’, Scientific Research and Essays, 6 (20), pp. 4152-4162, 2011. (IF 0.442)

 

  1. Mohammad Ismail and Bala Muhammad, ‘Electrochemical Chloride Extraction Effect on Blended Cements’, Doi: 10.1680/adcr.2011.23.1.1. Advances in Cement Research, 23 (5), pp. 241-248, 15 Sept. 2011. (IF 1.080)

 

  1. Mohammad Ismail, Bala Muhammad, Abdirahman Ali Yussuf, Zaiton Majid and Mohamed ElGelany Ismail, ‘Mechanical Capabilities and Fire Endurance of Natural Rubber Latex-Modified Cement Concrete (NRL-MCC)’, Canadian Journal of Civil Engineering, Vol. 38(6), pp. 661-668, 4 Jul. 2011. doi: 10.1139/L11-035, ENGINEERING, CIVIL = Q4, (IF 0.401)

 

  1. Muhammad, B., Ismail, M., Haron, Z., Ali Yussuf, A. ‘Elastomeric effect of natural rubber latex on compressive strength of concrete at high temperature. Journal of Materials in Civil Engineering, 23(12), pp 1697-1702, Dec. 2011. ISSN: 0899-1561.  CONSTRUCTION & BUILDING TECHNOLOGY = Q2, ENGINEERING, CIVIL = Q2, (IF 1.322)

 

  1. Bala Muhammad and Mohammad Ismail, ‘Performance of natural rubber latex modified concrete in acidic and sulphate environment’, Construction and Building Materials, Vol 31, 129-134, 2012, (IF 1.834)

 

  1. Bala Muhammad, Mohammad Ismail, Muhammad Aamer Rafique Bhutta and Zaiton Abdul-Majid, ‘Influence of Non-Hydrocarbon Substances on the Compressive Strength of Natural Rubber Latex-Modified Concrete’, Construction and Building Materials, Vol 27(1), 241-246. 1 Feb.2012. (IF 1.834)

 

  1. Mohammad Ismail, Bala Muhammad, Esah Hamzah, TanWui Keong, ‘Corrosion behaviour of dual-phase and galvanized steels in concrete’, Anti-Corrosion Methods and Materials 59(3), 132-138, 15 Mei 2012, METALLURGY & METALLURGICAL ENGINEERING = Q3, (IF 0.414)

 

  1. Ainul Haezah Noruzman, Bala Muhammad*, Mohammad Ismail, Zaiton Abdul-Majid, ‘Characteristics of treated effluents and their potential applications for producing Concrete’, Journal of Environmental Management Vol 110, No , 27-32, 2012., ENVIRONMENTAL SCIENCES = Q1, (IF 3.245)

 

  1. O. Bamaga • Mohamed A. Ismail • Z. A. Majid, Mohammad Ismail • M.W. Hussin, ‘Evaluation of Sulfate Resistance of Mortar Containing Palm Oil Fuel Ash from Different Sources’ Arabian Journal for Science and Engineering, Vol 38(9), pp 2293-2301, Sept. 2013. ISSN: 1319-8025 (DOI 10.1007/s13369-012-0503-z, 9 Jan. 2013) MULTIDISPLINARY SCIENCES = Q3, (IF 0.385)

 

  1. Bala Muhammad, Mohammad Ismail ‘Performance of hydrocarbon particles on the drying shrinkage of cement Mortar’, Construction and Building Materials Vol 48 ( ) pp868–873 Nov 2013. ISSN: 0950-0618, (IF 2.293)

 

  1. Salawu Abdulrahman Asipita, Mohammad Ismail*, Muhd Zaimi Abd Majid, Zaiton Abdul Majid, CheSobry Abdullah, Jahangir Mirza, ‘Green Bambusa Arundinacea leaves extract as a sustainable corrosion inhibitor in steel reinforced concrete’. Journal of Cleaner Production 67  139-146, 15 Mar. 2014, ISSN 0959 6256., ENGINEERING, ENVIRONMENTAL = Q1/ ENVIRONMENTAL SCIENCES = Q1, (IF 3.398)

 

  1. Taha Mehmannavaz, Mohammad Ismail, Salihuddin Radin Sumadi,Muhammad Aamer, Rafique Bhutta,Mostafa Samadi, and SeyedMahdi Sajjadi, ‘Binary Effect of Fly Ash and Palm Oil Fuel Ash on Heat of Hydration Aerated Concrete’.  The Scientific World Journal Volume 2014, Article ID 461241, 6 pages, http://dx.doi.org/10.1155/2014/461241, 13 Feb. 2014. ISSN 1537-744X., MULTIDISCIPLINARY SCIENCES = Q1., (IF 1.730)

 

  1. Ibrahim Ogiri Hassan, Mohammad Ismail, Parham Forouzani, Zaiton Abdul Majid, Jahangir Mirza. ‘Flow characteristics of ternary blended self-consolidating cement mortars incorporating palm oil fuel ash and pulverised burnt clay’. Construction and Building Materials 64 (2014) pp 253–260, May 2014, ISSN: 0950-0618 CONSTRUCTION & BUILDING TECHNOLOGY = Q1/ MATERIALS SCIENCE, MULTIDISCIPLINARY = Q1, (IF 2.293)

 

  1. Yazdi, M.F.A., Zakaria, R., Mustaffar, M. Abd. Majid, M.Z., Zin, R.M., Ismail, M., Yahya, K. ‘Bio-composite materials potential in enhancing sustainable construction’ Desalination and Water Treatment, Volume 52, Issue 19-21, June 2014, Pages 3631-3636, ISSN 1944-3994 (print) / 1944-3986 (online).   ENGINEERING, CHEMICAL = Q3,  WATER RESOURCE = Q3, (IF 0.988)

 

  1. A.K. Hafizah, MAR Bhutta, MY Jamaluddin, MH Warid, M. Ismail, MS Rahman, I Yunus, M Azman, ‘Kenaf Fibre reinforced Polymer Composite for strengthening RC beams’, Journal of Advanced Concrete Technology, Vol 12 pp. 167-177, 2014, online ISSN: 1347-3913.   CONSTRUCTION & BUILDING TECHNOLOGY = Q3. MATERIALS SCIENCE, MULTIDISPLINARY = Q4. ENGINEERING CIVIL  = Q4, (IF 0.508)

 

  1. Pandian Bothi Raja, Seyedmojtaba Ghoreishiamiri and Mohammad Ismail, ‘Natural Corrosion Inhibitors for Steel Reinforcement in Concrete—A Review’. Surface Review and Letters, Vol. 22, No. 3 (2015) 1550040 (8 pages). World Scientic Publishing Company. Print ISSN 0128-625X, Online ISSN 1793-6667, DOI: 10.1142/S0218625X15500407. CHEMISTRY, PHYSICAL = Q4, PHYSICS, CONDENSED MATTER = Q4, (IF 0.380)

 

  1. Mohammad Ismail, Ainul Haezah Noruzman, Muhammad Aamer Rafique Bhutta, Taliat Ola Yusuf and Ibrahim Hassan Ogiri, ‘Effect of Vinyl Acetate Effluent in Reducing Heat of Hydration of Concrete’, KSCE Journal of Civil Engineering, (0000) 00(0):1-7, Mar.2015, ISSN: 1226-7988 (print version), ISSN: 1976-3808 (electronic version) DOI 10.1007/s12205-015-0045-5. ENGINEERING, CIVIL = Q3, (IF 0.484)

 

  1. Nur Hafizah A. Khalid , Mohd Warid Hussin , Mohammad Ismail , Norazah Basar , Mohamed A. Ismail, Han-Seung Lee , Azman Mohamed, ‘Evaluation of effectiveness of methyl methacrylate as retarder additive in polymer concrete, Construction and Building Materials 93 (2015) 449–456, CONSTRUCTION & BUILDING TECHNOLOGY = Q1/ , MATERIALS SCIENCE, MULTIDISCIPLINARY = Q1, (IF 2.296)

 

  1. S.M. Abdul Awal, I.A. Shehu, Mohammad Ismail, ‘Effect of cooling regime on the residual performance of high-volume palm oil fuel ash concrete exposed to high temperatures’, Construction and Building Materials 98 875–883, Nov. 2015. (IF 2.296)

 

  1. Mohammad Ismail , Chan Kee Yew, Bala Muhammad, ‘Life-span prediction of abandoned reinforced concrete residential Buildings’, Construction and Building Materials 112, April 2016, 1059–1065, CONSTRUCTION & BUILDING TECHNOLOGY = Q1/ , MATERIALS SCIENCE, MULTIDISCIPLINARY = Q1, (IF 2.296)

 

 

SCOPUS Journal :

 

  1. Abdullah Saand, Mohammad Ismail and Salihuddin Radin Sumadi, “Influence of Prepackaged Polymer Modified Mortar as a Modifier on Strength of Concrete”, Journal of Applied Science 7 (24): 4023-4027, 2007.

 

  1. Mohammad Ismail, Siti Fatimah A.R, Bala Muhammad, Norhazilan Md. Noor and Hazri Bakhtiar, ‘Embedded Sensor for Detecting Corrosion of Reinforcement in Concrete’, Advanced Materials Research Vols. 250-253 (2011) pp 1118-1123, Online available since 2011/May/17 at www.scientific.net © (2011) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMR.250-253.1118

 

  1. Abdulrahman, A.S., Ismail, M and Hussain, M.S., ‘Inhibiting Sulphate Attack on Concrete by Hydrophobic Green Plant Extract’, Advanced Materials Research Vols. 250-253 (2011) pp 3837-3843, Online available since 2011/May/17 at www.scientific.net © (2011) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMR.250-253.3837

 

  1. Abdulrahman, A.S., Ismail, M., Hussain, M.S., ‘Inhibition of corrosion of mild steel in hydrochloric acid by bambusa arundinacea’, International Review of Mechanical Engineering 5 (1), pp. 59-63, 2011

 

  1. Siti Fatimah Abdul Rahman, Mohammad Ismail, Norhazilan Md. Noor*, Hazri Bakhtiar, ‘Embedded Capacitor Sensor For Monitoring Corrosion Of Reinforcement In Concrete’, Journal of Engineering Science and Technology, Vol. 7, No. 2, 209–218, 2012.

 

  1. Mohammad Ismail, Taliat Ola Yusuf, b, Ainul H Noruzman, and I.O. Hassan. ‘Early Strength Characteristics of Palm Oil Fuel Ash and Metakaolin blended Geopolymer Mortar’. Advanced Materials Research Vols. 690-693 (2013) pp 1045-1048. © (2013) Trans Tech Publications, Switzerland. doi:10.4028/www.scientific.net/AMR.690-693.1045, ISSN 1662-8985

 

  1. O.Hassan, Mohammad Ismail, Ainul Haezah Noruzman, Taliat Ola Yusufd, Taha Mehmannavaz and Jamilu Usman.  ‘Characterization of some key Industrial Waste products for sustainable Concrete production’. Advanced Materials Research Vols. 690-693 (2013) pp 1091-1094. © (2013) Trans Tech Publications, Switzerland. doi:10.4028/www.scientific.net/AMR.690-693.1091, ISSN 1662-8985

 

  1. H. Noruzman, M. Ismail, M. A. R. Bhutta, T. O. Yusuf, Shehu I.A and I.O. Hassan. ‘Strength and Durability Characteristics of Polymer Modified Concrete Incorporating Vinyl Acetate Effluent’. Advanced Materials Research Vols. 690-693 (2013) pp 1053-1056. © (2013) Trans Tech Publications, Switzerland. doi:10.4028/www.scientific.net/AMR.690-693.1053, ISSN 1662-8985

 

  1. Eyu D. G., Esah H., Chukwuekezie C., Idris J. and Mohammad I.. ‘Effect of Green Inhibitor on The Corrosion Behaviour of Reinforced Carbon Steel in Concrete’. ARPN Journal of Engineering and Applied Sciences, Vol. 8, No. 5, pp 326-332, May 2013 ISSN 1819-6608.

 

  1. Abdulrahman, A. S. and Mohammad Ismail. ‘Electrochemical assessment of concrete ternary inhibitors used in retarding corrosion of steel reinforcement’, ARPN Journal of Engineering and Applied Sciences, Vol. 9, No. 5, May 2014 ISSN 1819-6608

 

  1. Seyed Meysam Koshnava, Raheleh Rostami, Mohammad Ismail, Alireza Valipour, ‘Using fungi treatment as green and environmentally process for surface modification of natural fibres’. Applied Mechanic and Materials, Vol. 554, 2014, pp 116-122

 

  1. Hafizah, N. A. K., Hussin, M. W., Jamaludin, M. Y.*, Bhutta, M. A. R., Ismail, M., Azman, M, ‘Tensile Behaviour of Kenaf Fiber Reinforced Polymer Composites’ Jurnal Teknologi, 69:3 (2014) 11–15 | www.jurnalteknologi.utm.my | eISSN 2180–3722

 

  1. Abdulrahman, A.S., Ismail, M. ‘Assessment of green inhibitor on the crystal structures of carbonated concrete’ Jurnal Teknologi (Sciences and Engineering) Volume 69, (3), 2014, Pp. 1-9

 

  1. Mehmannavaz, T., Ismail, M., Sumadi, S.R., Samadi, M., Sajjadi, S.M., ‘Lightweight mortar incorporating various percentages of waste materials’. Jurnal Teknologi (Sciences and Engineering) 67 (3), pp. 83-89, 2014. ISSN:0127-9696, E-ISSN:2180-3722

 

  1. Taliat Ola Yusuf, Mohammad Ismail, Jamilu Usman, and Ainul H. Noruzman, ‘Impact of Blending on Strength Distribution of Ambient Cured Metakaolin and Palm Oil’ Fuel Ash Based Geopolymer Mortar. Article ID 658067. Advances in Civil Engineering, Volume 2014, 8 pages. Hindawi Publishing Corporation, http://dx.doi.org/10.1155/2014/658067

 

  1. Seyed Meysam Khoshnava, Raheleh Rostami, Mohammad Ismail and Hasanuddin Lamit, ‘Obstacles and Drivers in Steering IBS towards Green and Sustainability’ Research Journal of Applied Sciences, Engineering and Technology, Vol 8(14) 1639-1647, 2014 ISSN: 2040-7459

 

  1. K. F. M. Ali, N. Md. Noor*, N. Yahaya, A. A. Bakar and M. Ismail, Effectiveness of Ultraviolet Light For Mitigating Risk of Microbiologically Influenced Corrosion in Steel Pipeline 74:4 (2015) 27–32 | www.jurnalteknologi.utm.my | eISSN 2180–3722 |

 

  1. Jahangir Mirza, Nur Hafizah A. Khalidb*, Mohd Warid Hussin, Mohammad Ismail, Mohamed A. Ismail, Azman Mohamed, Nur Farhayu Ariffin, Mahmood Md. Tahir, Effectiveness Of Palm Oil Fuel Ash as Micro-Filler in Polymer Concrete Jurnal Teknologi 77:16 pp75–80, 2015 eISSN 2180–3722.

 

  1. K. Nur Hafizah, M.W. Hussin, M. Ismail, M.A.R. Bhutta, M. Azman, P.J. Ramadhansyah, A. Nur Farhayu and A.S.L. Nor Hasanah, ‘Potential Effect of Palm Oil Fuel Ash as Micro-Filler of Polymer Concrete’ Proceeding of the international conference on global sustainability and chemical engineering’. Pp 41-49, DOI 10.1007/978-981-287-505-1_6, ISBN 978-981-287-504-4, online ISBN 978-981-287-505-1, Springer Singapore.

 

 

NON INDEXED Journal :

 

  1. Mohammad bin Ismail dan Warid Husain, “Masa Depan Konkrit Cabaran dan Penyelesaian” Jurnal Kej. Awam, Jld 2, Bil 1, 1988.

 

  1. Mohammad bin Ismail and Ahmad Zaidon, “Monitoring Corrosion of Reinforcement-Half Cell Vs Potential Wheel”, Jurnal Kej. Awam, Vol 6, No 1, 1993.

 

  1. Mohammad Ismail & G.S. Sergi, “Electrochemical Chloride Extraction Treatment on Chloride Contaminated Concrete”, Jurnal Teknologi, No. 33(B), pp41-68, Dis.2000.

 

  1. Ismail, Mohammad and Siaw, Wai San, ‘Kesan kebakaran ke atas kekuatan mampatan konkrit (2000) Kesan kebakaran ke atas kekuatan mampatan konkrit’. Jurnal Kejuruteraan Awam, 12 (2). pp. 13-32. ISSN 0128-0147

 

  1. Mohammad Ismail and Siaw Wai San, “Penyediaan Carta Penentukuran Konkrit Terbakar”, Jurnal Kej Awam, Vol. 12, No 2, pp 13-32, 2000.

 

  1. Ooi Soon Lee, Mohd Razman Salim, Mohammad Ismail and Md. Imtiaj Ali, “Reusing Treated Effluent in Concrete Technology”, Jurnal Teknologi No. 34(F), pp 1-10, Jun 2001.

 

  1. Mohammad Ismail and Nordin Yahaya, “A Review on Effect of Using Electrochemical Extraction Technique in Corrosion Treatment of Reinforced Concrete”, Jurnal Kej. Awam, Vol 13 No. 1, pp 27-36, 2001.

 

  1. Siaw Wai San, Mohammad Ismail, Madzlan Aziz and Rosly Abd Rahman, “Y-Shape Optical Fibre Bundle in Monitoring Corrosion”, Jurnal Kej. Awam, Vol 14 No. 1, pp 47-59, 2002.

 

  1. Mohammad Ismail, Erica Dina, Rosly Abdul Rahman and Sabirin Ikhsan, “Observation of Corrosion Process of Reinforcing Steel”, Jurnal Kej. Awam, Vol 17 No. 1, pp 13-22, 2005.

 

  1. Salehuddin Ayop, Rosli Md Zin and Mohammad Ismail, “Condition Assessment of Marine Structures using Functional Condition Index” Malaysian Journal of Civil Engineering, Vol. 18 No 2, pp 129-138, 2006

 

  1. Mohammad Ismail, M. E. Ismail, Nordin Yahaya and Esah Hamzah, ‘Corrosion Behaviour of Dual-Phase Steel in Concrete’ Al-Azhar University Engineering Journal, JAUES, Vol 3 No 10, pp 492-505, Dec. 2008.

 

  1. E. Ismail, Mohammad Ismail and Abdullah Saand, ‘Tensile Strength Behaviour of Concrete Modified with Ready-Mixed Polymer Modified Mortar’, Al-Azhar University Engineering Journal, JAUES, Vol 3 No 10, pp 766-772, Dec. 2008.

 

  1. Mohammad Ismail, Rosli Mohamad Zin, Mohamed E. Ismail, Jamaluddin M. Y. and Wahid Omar ‘Awareness among professionals in malaysian construction industries on reinforcement corrosion prevention and protection’ Malaysian Journal of Civil Engineering, Vol. 20 No 2, pp 200-210, 2008.

 

  1. Mohammad Ismail and S. Sergi, George, ‘Electrochemical chloride extraction treatment on chloride contaminated concrete. Jurnal Teknologi, pp. 128-153. Penerbit UTM , Johor (2008)

 

  1. Bala Muhammad, A.A. Yussuf and Mohammad Ismail, ‘Desirability of Void-Free Cement-Latex Blend using Morphology and Thermal Degradation Analysis’, Indian Concrete Journal, Vol 83, No 11, pp. 32-39, Nov. 2009. ISSN 0019-4565

 

  1. Mohammad Ismail, Bala Muhammad and Nur Aiza Mohamad, ‘Durability Performance of Natural Rubber Latex Modified Concrete’, Malaysian Journal of Civil Engineering Vol 21, No 2, pp196-205, Dec-2009.

 

  1. Mohammad Ismail, M.E. Ismail, S.K. Lau, Bala Muhammad and Zaiton Majid, ‘Fabrication of Bricks from Paper Sludge and Palm Oil Fuel Ash’, Concrete Research Letters Vol. 1(2), pp 60-66, 2010.

 

  1. Mohamed A. Ismail, Mohd Warid Hussin and Mohammad Ismail, ‘Palm Oil Fuel Ash as the Future supplementary Cementitious Material in Concrete’, Concrete Plant International, Issue 3, pp 38-45, June 2010.

 

  1. Mohammad Ismail, A. S. Abdulrahman and Mohammad Sakhawat Hussain, ‘Solid Waste as Environmental Benign Corrosion Inhibitors in Acid Medium’, International Journal of Engineering Science and Technology (IJEST), Vol. 3 No. 2, 1742-1748, Feb 2011.

 

  1. Siti Fatimah Abdul Rahman, Mohammad Ismail, Bala Muhammad, Norhazilan Md Noor and Hazri Bakhtiar, ‘Monitoring Corrosion of Reinforcement Bar Using Capacitive Sensor at Different Concrete Cover Depth, Malaysian Journal of Civil Engineering 23(2):1-11 2011.

 

  1. Mohammad Ismail, Edy Tonnizam Mohamad, Voon Su Hun, ‘Assessment of potential alkali silica reaction in aggregates from Teluk Ramunia, Johor, Malaysia’, Geoscientists and Ethics for a Sustainable Society, Vol 11, pp119, June 2011

 

  1. Abdulrahman A. S. and Mohammad Ismail, ‘Evaluation of corrosion inhibiting admixtures for steel reinforcement in concrete’, International Journal of the Physical Sciences Vol. 7(1), pp. 139 – 143, 2 January, 2012. DOI: 10.5897/IJPS11.966, ISSN 1992-1950

 

  1. Siti Fatimah Abdul Rahman, Mohammad Ismail, Norhazilan Md. Noor, Hazri Bakhtiar, Nordin Yahaya and Ahmad Safuan A. Rashid, ‘Evaluation of Capacitor Sensor Performance in Reinforced Concrete for Corrosion Monitoring’, Advances in Natural and Applied Sciences, 7(2): 179-185, 2013, ISSN 1995-0772

 

  1. Khairol Azhar Nordin, Musa Adamu, Parham Forouzani and Mohammad Ismail, ‘Performance of waste tyre and palm oil fuel ash concrete’. Malaysian Journal of Civil Engineering, 25 (2). pp. 178-188. 2013, ISSN 1823-7843

 

 

H INDEX :    7
 
PROCEEDINGS/CONFERENCE

 

  1. Mohammad Ismail, Mahmood Md. Tahir and Che Wan Fadhil Che Wan Putra, “Ionic Redistribution During ECE of Blended Cement”, World Enginering Congress, Organised by IEM and UPM, Kuala Lumpur, July 1999.

 

  1. Che Wan Fadhil Che Wan Putra, Mahmood Md. Tahir and Mohammad Ismail, “Improving Data Exchange for Integrating Design and Construction”, World Enginering Congress, Organised by IEM and UPM, Kuala Lumpur, July 1999.

 

  1. Mahmood Md. Tahir, David Anderson, Che Wan Fadhil Che Wan Putra and Mohammad Ismail, “Design of Composite Beams in Unbraced Steel Frames”, World Enginering Congress, Organised by IEM and UPM, Kuala Lumpur, July 1999.

 

  1. Mohammad Ismail, Nordin Yahaya, A.M. Makhtar and W. Omar, “Effect of Electrochemical Chloride Extraction Treatment on Physical and Microstructural Properties of Blended Cement”, Proceeding 4th. APSEC 2000 Conference Organized by CTMC and Department of Material and Structures, FKA, UTM, Kuala Lumpur, 13-15 Sept. 2000.

 

  1. R. Salim, M. Ismail and S.L. Ooi, “The Use of Sewage Effluents as Mixing Water for Concrete” Proceeding 4th. APSEC 2000 Conference Organized by CTMC and Department of Material and Structures, FKA, UTM, Kuala Lumpur, 13-15 Sept. 2000.

 

  1. Yahaya, T.C.The, M.Ismail and M. Md Tahir, “Reliability-Based Assessment on Corrosion for Oil and Gas Offshore Pipelines”, Proceeding 4th. APSEC 2000 Conference Organized by CTMC and Department of Material and Structures, FKA, UTM, Kuala Lumpur, 13-15 Sept. 2000.

 

  1. M.Makhtar, N. Yahaya and M.Ismail, “Flexural Strength Properties of Polymer Modified Mortars Exposed to Sulphuric Acid Environments”, Proceeding 4th. APSEC 2000, Organised by CTMC and Department of Material and Structures, FKA, UTM, Kuala Lumpur, 13-15 Sept. 2000.

 

  1. Yahaya, N. Md Noor, M. Ismail, A.M. Makhtar, “Assessment Methods for Structural Integrity of Corroded Pipeline”, Proceedings of the IMM2000 Corrosion Conference and Exhibition, Kuantan 1-2 November. 2000, Institute of Materials, Malaysia.

 

  1. Yahaya, N. Md Noor, M. Ismail and M.N.M. Basir, “Comparison Between Methods of Assessment for Residual Strength Prediction of Corroded Pipeline”, Proceeding NACE-9th. Middle East Corrosion Conference (NACE-9th. MECC), 12-14 February 2001, Manama Bahrain. NACE – Institute of Engineers, Bahrain.

 

  1. Yahaya, M.N.M. Basir and M. Ismail, “Risk Based Assessment of Internally Corroded Offshore Gas Pipelines”, Proceeding 1st. Asia Pacific Conference on Offshore System, 23-24 April 2001.

 

  1. Mohammad Ismail, G.S. Sergi and Nordin Yahaya, “Ionic Redistribution After Electrochemical Chloride Extraction”, Proceeding of the 7th. International Conference on Concrete CONSET 2001, Organized by UiTM, UM and IEM, 5-7 June 2001, Shah Alam Selangor.

 

  1. Mohammad Ismail and Sallehuddin Shah Ayop, “Development of an Intelligent Rating System for Maintenance of Marine Structures in Malaysia”, Proceeding of the 7th. International Conference on Concrete CONSET 2001, Organized by UiTM, UM and IEM, 5-7 June 2001, Shah Alam Selangor.

 

  1. Siaw Wai San, Mohammad Ismail, Madzlan Aziz and Rosly Abd Rahman, “The Potential of Fibre Optic Sensor in Monitoring the Chemical Properties of Civil Structures”, 2nd.World Enginering Congress, Organised by IEM and UPM, Serawak, July 2002.

 

  1. Siaw Wai San, Mohammad Ismail, Madzlan Aziz and Rosly Abd Rahman, “Monitoring of Reinforcement Corrosion by Fibre Optic Sensor”, 5th Asia Pacific Structural Engineering & Construction Conference, Organised by Department of Structures & Materials, JKR and CIDB, Johor Bahru, August 2003.

 

  1. Mohammad Ismail, Shahrin Mohammad, A.H. Abdul Raof, Masdinah Alauyah Md. Yusof and Khairi Izwan Abdullah, “The English for Civil Engineering Programme: Students’ Perception, CEE 2004, Kuala Lumpur, 14-15 Dec 2004.

 

  1. H. Abdul Raof, Masdinah Alauyah Md. Yusof and Khairi Izwan Abdullah, Mohammad Ismail, Shahrin Mohammad, “Work-Embedded Language Training: An Alternative Approach to Curriculum Design, CEE 2004, Kuala Lumpur, 14-15 Dec 2004.

 

  1. Abdullah Saand, Mohammad Ismail, Salihuddin Radin Sumadi and Musarrat Ullah Khan Afridi, “Behaviour of Pre-Damaged Reinforced Concrete Beams Repaired with Polymer-Modified Mortar”, 10th. East Asia-Pacific Conference on Structural Engineering and Construction”, 3-5 August, 2006.

 

  1. Abdullah Saand, Mohammad Ismail, Salihuddin Radin Sumadi and Musarrat Ullah Khan Afridi, “Strength Behaviour of Polymer Modified Concrete using Prepacked Polymer Modified Mortar as an Additive”, 5th. Asian Symposium on Polymers in Concrete, SERC, Chennai, India, 10-11 September, 2006.

 

  1. Mohammad Ismail, Mohamed E. Ismail and Asdayanti Uzairi, “Concrete Deterioration in Malaysia”, 2nd. ACF International Conference, Bali Indonesia, 20-21 Nov. 2006.

 

  1. Abdullah Saand, Mohammad Ismail and Salihuddin Radin Sumadi, “Tensile Strength Behaviour of Polymer Modified Concrete Made with PPMM as an Additive”, 2nd. ACF International Conference, Bali Indonesia, 20-21 Nov. 2006.

 

  1. Wahid Omar, Shahrin Mohamad, Mohammad Ismail and Tan Pui Lai, “Development of Local Design Values in Structural Concrete Design”, Construction Industry Research Achievement International Conference (CIRAIC 2007), Kuala Lumpur, 13-14 Mar. 2007.

 

  1. Norhazilan Md Noor and Mohammad Ismail, “A Semi-Probabilistic Prediction of Remaining Strength of Corroded Steel Pipelines using DNV RP-F101”, World Engineering Congress (WEC 2007), Penang, Malaysia, 5-9 Aug. 2007.

 

  1. Mohammad Ismail, Norhazilan M Noor and Esah Hamzah, “Corrosion Behaviour of Dual-Phase and Galvanized Steel in Concrete”, The 1st. International Conference of European Asian Civil Engineering Forum (EASEF 2007), Karawaci Jakarta, Indonesia, 26-27 Sept. 2007.

 

  1. E. Ismail, M. Ismail and M. Ohtsu, “Non Destructive Evaluation of Corrosion Activity in Reinforced Concrete”, Proceeding Proceedings The fourth International Structural Engineering and Construction Conference, ISBN 978-0-415-45756-9, Melbourne AUSTRALIA, 26-28 Sept. 2007.

 

  1. Saand, Mohammad Ismail and S.R. Sumadi, “Load Carrying Capacity of Pre-Damaged Reinforced Concrete Beams Repaired with Polymer-Modified Mortar”, Proceedings 12th International Congress on Polymers in Concrete (ICPIC 07), Chuncheon, KOREA, 27-28 Sept. 2007.

 

  1. Musarrat Ullah Khan Afridi, Asharf Ali, Abdullah Saand, Mohammad Ismail and Salihuddin R. Sumadi, “Successful Usage of Prepackaged Polymer-Modified Cementitious Materials in Efficiency Improvement and Rehabilitation of Water Retaining Structures”, Proceedings 12th International Congress on Polymers in Concrete (ICPIC 07), Chuncheon, KOREA, 27-28 Sept. 2007.

 

  1. Mohammad Ismail, Rosly Abd Rahman and Erica Dina, “Corrosion Detection of Embedded Steel in Concrete”, Proceedings 11DBMC International Conference on Durability of Building Materials and Components, ISBN 978-975-561-329-1 (V.4) Organised by Istanbul Technical University, Istanbul, TURKEY, 11-14 May, 2008.

 

  1. E. Ismail, Mohd Warid Hussin and Mohammad Ismail, “High Performance Blended Cement Concrete in Malaysia”, Proceedings 8th. International Symposium on Utilization of High Strength and High-Performance Concrete, Organized by Japan Concrete Institute, Tokyo, JAPAN, 27-29 Oct. 2008.

 

  1. Mohammad Ismail, M. E. Ismail, Nordin Yahaya and Esah Hamzah, “Corrosion Behaviour Of Dual-Phase Steel In Concrete”, Al-Azhar Engineering Tenth International Conference (AEIC 2008), Organized by Al-Azhar University, Cairo Egypt 24-26 Dec. 2008.

 

  1. E. Ismail, Mohammad Ismail and Nurul Ain, “Tensile Strength Behaviour of Concrete Modified with Ready-Mixed Polymer Modified Mortar”, Al-Azhar Engineering Tenth International Conference (AEIC 2008), Organized by Al-Azhar University, Cairo EGYPT 24-26 Dec. 2008.

 

  1. Mohammad Ismail, Bala Muhammad, M. E. Ismail and A.A. Yussuf,Clonal Classification Impact on Physical and Mechanical Properties of Natural Rubber Latex – Modified Concrete”, Proceedings 7th International Conference on Composite Science And Technology ISBN 978-9948-427-11-7, Organized by: Institute of Materials Systems College of Engineering American University of Sharjah, UNITED ARAB EMIRATES, 20-22 Jan 2009.

 

  1. A. Mansur, Mohammad Ismail, and Y. J. Lau,Shear Strength Prediction of Ferrocement Using Artificial Neural Network”, Proceeding of the 9th. International Symposium of Ferrocement and Thin Reinforced Cement Composite, ISBN 978-979-1165-93-8, Bali, INDONESIA, 18-20 May 2009.

 

  1. A. Mansur, Mohammad Ismail and C.E. Chiong,Strengthening Of Bolted Shear Joints In Industrialised Ferrocement Construction”, Proceeding of the 9th. International Symposium of Ferrocement and Thin Reinforced Cement Composite, ISBN 978-979-1165-93-8,, Bali, INDONESIA, 18-20 May 2009.

 

  1. Mohammad Ismail, Bala Muhammad, M. Hamidi Hadi M. Zabidin, “Effect of Latex Concentrate on the Strengths and Drying Shrinkage of Concrete”, Proceeding 7th Asia Pacific Structural Engineering and Construction Conferences 2009 (APSEC 2009), ISBN 978-983-42613-8-2 (Vol II), Langkawi MALAYSIA, 4-6 Aug. 2009.

 

  1. Mohammad Ismail, Lau Sim Keok, Zaiton Majid and Mohamed E. Ismail, “Utilization of Waste Material in Manufacturing of Construction Product”, Proceeding 7th Asia Pacific Structural Engineering and Construction Conferences 2009 (APSEC 2009), ISBN 978-983-42613-8-2 (Vol II), Langkawi MALAYSIA, 4-6 Aug. 2009.

 

  1. E. Ismail, Nurul Ain Hanina and Mohammad Ismail, “Concrete Compressive Strength with Prepacked Polymer Modified Cementitious Mortar as Modifier”, Proceeding 7th Asia Pacific Structural Engineering and Construction Conferences 2009 (APSEC 2009), ISBN 978-983-42613-8-2 (Vol II), Langkawi MALAYSIA, 4-6 Aug. 2009.

 

  1. Jamaluddin M Yatim, Mohammad Ismail, Wan A.W.A Rahman and Chiew V. Yaw, “Performance of Concrete Containing Effective Microorganisms (EM) under Various Environments”, Proceeding 7th Asia Pacific Structural Engineering and Construction Conferences 2009 (APSEC 2009), ISBN 978-983-42613-8-2 (Vol II), Langkawi MALAYSIA, 4-6 Aug. 2009.

 

  1. Mohammad Ismail, Bala Muhammad, Nur Aiza Mohamad,Effect of Latex Concentrate on Sulphates Resistance and Water Absorption of Concrete”, Proceeding 6th Asian Symposium of Polymer in Concrete (ASPIC 2009), ISBN 978-7-5608-4174-8, Organized by Key Laboratory of Advanced Civil Engineering Materials, Tonji University, Shanghai CHINA, 29-30 Oct. 2009– (INVITED PAPER)

 

  1. Siti Fatimah A.R, Mohammad Ismail, Norhazilan Md.Noor, Hazri Bakhtiar, “Embedded Capacitance Corrosion Sensor For Measuring Corrosion Potential of Rebar” , Proceedings of  3rd  Engineering Conference on Advancement in Mechanical and Manufacturing for Sustainable  Environment, EnCon2010, Kuching, Sarawak, Malaysia. 14-16 Apr. 2010

 

  1. Mohammad Ismail, Bala Muhammad, Jamaluddin Mohd Yatim, Ainul Haezah Noruzman and Yong Woo Soon, “Behavior of Concrete with Polymer Additive at Fresh and Hardened States”, Proceeding the twelth East Asia Pacific Conference on Structural Engineering & Construction (EASEC-12), Hong Kong Special Administrative Region, China. 26-28 Jan. 2011. (Scopus)

 

  1. Ismail, M., Muhammad, B., Yatim, J.M., Noruzman, A.H., Soon, Y.W, Behaviour of Concrete with polymer additive at fresh and hardened state, Procedia Engineering, 14, pp 2230-2237, 2011 (Scopus)

 

  1. S. Abdulrahman, Mohammad Ismail, Mohammad Sakhwat Hussain, “Eco-friendly Corrosion Inhibitor for reinforced concrete”, Proceeding of 3rd. International Congress on Green Process Engineering, Organised by Universilty Malaya and Universite de Toulouse, Kuala Lumpur Malaysia, 6-8 Dec. 2011.

 

  1. Mohammad Ismail, Siti Fatimah A.R., Muhammad B., Noor, N. Md., Bakhtiar, H. “Embedded sensor for detecting corrosion of reinforcement in concrete”, Advanced Materials Research, 250-253, pp.1118-1123. (Scopus)

 

  1. Mohd Azrul Abdul Rajak, Zaiton Abdul Majid, Mohammad Ismail, “Electrical Conductivity Measurement in Evaluating Pozzolanic Activity of Palm Oil Fuel Ash”, Proceeding 8th Asia Pacific Structural Engineering and Construction Conferences 2012 (APSEC 2012), ISBN: 978-983-44826-1-9, Surabaya, INDONESIA 2-4 Oct. 2012.

 

  1. Mohammad Ismail, Hassan Ibrahim Ogiri, Thayalan Balakrishnan, “Corrosion Characterisation Of Reinforced Concrete Structures Exposed To Marine Environment”, Proceeding 8th Asia Pacific Structural Engineering and Construction Conferences 2012 (APSEC 2012), ISBN: 978-983-44826-1-9, Surabaya, INDONESIA 2-4 Oct. 2012.

 

  1. Mohammad Bin Ismail and Taliat Ola Yusuf, “Extraction of Alkaline Solution from Cocoa Pod Husk for Synthesis of Geopolymer”, Research, Development, and Practice in Structural Engineering and Construction, Edited by Vanissorn Vimonsatit, Amarjit Singh, and Siamak Yazdani, Copyright 2013 by Research Publishing Services :: rpsonline.com.sg. ISBN: 978-981-08-7920-4 :: doi: 10.3850/978-981-08-7920-4 M-47-0375 ASEA-SEC-1 The First Australia and South-East Asia Structural Engineering and Construction Conference Curtin University, Perth, Australia, Nov 28 – Dec 02, ISBN-13: 978-981-073677-4 ISBN-10: 981-07-3677-02012ASEA-SEC-1 The First Australia and South-East Asia Structural Engineering and Construction Conference

 

  1. Mohammad Ismail, Muhammad Aamer Rafique Bhutta and Ainul Haezah Noruzman, “Laboratory Evaluation of Polymer Modified Mortar Incorporating Waste Latex Paint Effluent”, Research, Development, and Practice in Structural Engineering and Construction, Edited by Vanissorn Vimonsatit, Amarjit Singh, and Siamak Yazdani, Copyright_c 2013 by Research Publishing Services :: rpsonline.com.sg. ISBN: 978-981-08-7920-4: doi: 10.3850/978-981-08-7920-4 M-47-0375. ASEA-SEC-1 The First Australia and South-East Asia Structural Engineering and Construction ConferenceCurtin University, Perth, Australia, Nov 28 – Dec 02, ISBN-13: 978-981-073677-4 ISBN-10: 981-07-3677-02012

 

  1. Nur Hafizah, A.K., Jamaludin, M.Y., Bhutta, M.A.R., Husin, M.W.c, Mohammad Ismail, Azman, M. Tensile Properties of Kenaf Fiber Reinforced Polymer Composites. The 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013). 16-17th April 2013. Universiti Teknologi Malaysia, Johor Bahru, Malaysia, pp. 474-478.

 

  1. Nurul Hidayah Roslan, Taliat Ola Yusuf, Mohammad Ismail, Evaluation of By-Product from Steel Industry as Cement Replacement.  The 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013). 16-17th April 2013. Universiti Teknologi Malaysia, Johor Bahru, Malaysia, pp. 474-478.

 

  1. Mohammad Ismail, Innovative Research on Waste and Green Materials for Sustainable Development,  ConCERN 2014, Conference for Civil Engineering and Research Network, 4-5th. Nov. 2014, Faculty of Civil and Environmental Engineering, Institute Technology Bandung, Indonesia.

 

  1. Mohanadoss Ponraj, Amirreza Talaiekhozani, Rosli Mohamad Zin, Mohammad Ismail, Muhd Zaimi Abd Majid*, Ali Keyvanfar, Hesam Kamyab, Bioconcrete Strength, Durability, Permeability, Recycling and Effects on Human Health: A Review. Proc. of the Third Intl. Conf. Advances in Civil, Structural and Mechanical Engineering- CSM 2015. Copyright © Institute of Research Engineers and Doctors, USA .All rights reserved. ISBN: 978-1-63248-062-0 doi: 10.15224/ 978-1-63248-062-0-28

 

 

National:

 

  1. Mohammad bin Ismail dan Mohd Hansom Ottoman, “Pengajaran dan Penilaian Prestasi Pelajar dan Pensyarah”, Seminar Kecemerlangan Akademik, JSB, FKA, UTM, 1991

 

  1. Mohammad bin Ismail, “Evaluation of an Offshore Structures using Potential Wheel”, StructuralAcademic Discourse, JSB, FKA, UTM, 1992

 

  1. Mohammad bin Ismail, “Corrosion Detection of Rebar”, National Seminar NDT on Concrete, Organised by UTM and Unit Tenaga Nuklear, Petaling Jaya, 1992.

 

  1. Mohammad, Saiful and Zulkifli, “Corrosion of Reinforced Concrete Bridges ”, Seminar Penyelidikan Kejuruteraan Awam (SEPKA), FKA, UTM, 1993

 

  1. Mohammad bin Ismail, “Protection of Structural Steelwork”, Paper presented at Short Course on Structural Steelwork Design to BS 5950, Johor Bahru, SPACE and FKA, UTM, 1994

 

  1. Mohammad Ismail, Mohd. Zulkifli Mohd. Yunus and Ahmadon Bakri, “Investigation and Rehabilitation of Reinforced Concrete Structures”, Seminar Kejuruteraan Awam (SEMKA 99), Organised by Fak. Kej. Awam, UTM, Melaka, 29-30 hb. Mei, 1999.

 

  1. Mohammad Ismail and Nordin Yahaya, “Measurement of Reinforcement Corrosion in Marine Structures”, Proceedings of the COSTAM 99, Organised by COSTAM in Collaboration with Universities, R&D Institutions and State Committees on Science & Technology, Kuala Lumpur 25-27 Oktober 1999.

 

  1. Sarimah, Masputriah, Zairus, Mohammad, Shamsul, Muhalim, “Using Computational Linguistic Analysis Approach to Produce an Internet Based Civil Engineering CBC Material”, Proceedings of the COSTAM 99, Organised by COSTAM in Collaboration with Universities, R&D Institutions and State Committees on Science & Technology, Johor Bahru, 6 – 8 Disember 1999.

 

  1. Nordin Yahaya dan Mohammad Ismail, “Penggunaan Sistem Perlindungan Katod dan Penyaringan Klorida bagi Mengawal Pengaratan Keluli dalam Struktur Konkrit Bertetulang”, Proceedings of AWAM 99′ Seminar anjuran USM, Lumut, 24-26 Januari 2000

 

  1. Ooi Soon Lee, Mohd Razman, Mohammad Ismail and Chua Hee Tak, “Potensi Guna Semula Effluen Kumbahan Dalam Bidang Pembinaan”, Proceedings of the COSTAM 2000, organized by COSTAM in Collaboration with Universities, R&D Institutions and State Committees on Science and Technology, Ipoh, 16-18 October 2000.

 

  1. Siaw Wai San, Mohammad Ismail and Rosly Abd Rahman, “The Potential of Fiber Optic Bundle in Corrosion Monitoring”, Proceeding of the Seminar on Construction, UTM, Johor, 12-13 September 2001.

 

  1. Siaw Wai San, Mohammad Ismail, Madzlan Aziz and Rosly Abdul Rahman, “Fibre Optic Sensor in Reinforcement Concrete Corrosion Monitoring”, Proceedings of the COSTAM 2001, organized by COSTAM in Collaboration with Universities, R&D Institutions and State Committees on Science and Technology, Melaka, 16-18 October 2001.

 

  1. Mohammad Ismail & Mohd Saiful Rizal Yusoff, “Application of Intermittent Cathodic Protection Using Solar Power in Reinforced Concrete”, Proceedings of Research Seminar on Materials and Construction, UTM Skudai Johor Bahru, 29-30 Oktober 2002.

 

  1. Siaw Wai San, Mohammad Ismail, Madzlan Aziz and Rosly Abdul Rahman, “To Determine Durability Related Properties in Reinforced Concrete using Fiber Optic Sensor”, Seminar Tahunan Biasiswa National Science Felloship (NSF) ke 3, Kuala Lumpur, 17-18 Disember 2002.

 

  1. Mohammad Ismail, Erica Dina & Rosly Abd Rahman, “Detection of Corrosion Process in Reinforced Concrete”, SEPKA 04’, UTM Skudai, Johor, Sept. 2004.

 

  1. Mohd Zulkifli Mohd Yunus, Mohammad Ismail & Johan Suhaili, “GIS for Civil Engineers: Theoritical to Practical Applications”, Civil Engineering Seminar, 9-10, Melaka, April 2005.

 

  1. Mohamed A. Ismail and Mohammad Ismail, “Moisture Transport in OPC and HPC Concrete”, National Seminar on Civil Engineering Research, SEPKA 06, UTM Skudai, Johor, 19-20 Dis. 2006.

 

  1. Mohammad Ismail and Mohamed A. Ismail, “Solar Energy as an Alternative Option in Cathodic Protection System for Sustainable Structures in Malaysia”, National Seminar on Civil Engineering Research, SEPKA 07, Skudai, Johor, 11-12 Dis. 2007.

 

  1. Mohammad Ismail, Edy Tonizam Mohamad and Voon Su Hun, “Assessment of potential alkali silica reaction in aggregates from Teluk Ramunia Johor, Malaysia”, Proceedings National Geoscience Conference. Organised by Geological Society of Malaysia. Johor Bahru, Malaysia. 11-12 June 2011.

 

  1. S. Abdulrahman, Mohammad Ismail. “Enculturation of Green Inhibitors for corrosion of Steel reinforced concrete”. National Seminar on Civil Engineering Research (SEPKA), National Seminar on Civil Engineering Research (SEPKA), Faculty of Civil Engineering, UTM. 13-15 Sept. 2011.

 

  1. S. Abdulrahman, Mohammad Ismail. “Eco-Friendly Green Inhibitor To Improve The Strength Of Concrete Contaminated By Chloride And Sulphate”. National Seminar on Civil Engineering Research (SEPKA), Faculty of Civil Engineering, UTM. 13-15 Sept. 2011.

 

  1. Siti Fatimah A.R, Mohammad Ismail,, Bala Muhammad, Norhazilan Md. Noor and Hazri Bakhtiar, “Monitoring Corrosion of Reinforcement Bar Using Capacitor Sensor at different Concrete cover depth”, . National Seminar on Civil Engineering Research (SEPKA), Faculty of Civil Engineering, UTM. 13-15 Sept. 2011 (Best paper)

 

  1. Mohd Azrul Abdul Rajak, Zaiton Abdul Majid and Mohammad Ismail, “Evaluation Of Pozzolanic Activity Of Palm Oil Fuel Ash (Pofa) Using Electrical Conductivity Method”, National Science Postgraduate Conference 2011, Ibnu Sina UTM. Organised by Faculty of Science, UTM, 16-17 Nov. 2011.

 

THESIS

 

  1. Mohammad bin Ismail, “Electrochemical Chloride Extraction to Halt Corrosion of Reinforcement In Concrete”, PhD Thesis, submitted to Aston University, UK, 1998.

 

  1. Mohammad bin Ismail, “Monitoring of Corrosion of Reinforcement Using the Half Cell Potential Method”, MSc. Dissertation submitted to University of Liverpool, UK, 1989.

 

  1. Mohammad bin Ismail, “Inelastic Analysis of Concrete Structures”, BSc. (Hons) Civil Eng.Tesis, submitted to University of Stratchlyde, UK, 1986.

 

 

ORIGINAL BOOK

 

  1. Shahrin, Aziz, Mohammad dan Redzuan, “Rekabentuk Keluli Menurut BS 5950”, DBP, 1994

 

  1. Mohammad bin Ismail, “Amalan Kerja Konkrit” (Translation), Unit Penerbitan Akademik UTM, 1993

 

  1. Mohammad bin Ismail, “Pengenalan Kepada Konkrit” (Translation), Unit Penerbitan Akademik UTM, 1993

 

  1. Mahmood, Shahrin, Mohd Hanim, Mohammad Ismail, Sarifuddin, A Aziz, Yusof and Airil Yasreen, “Steelwork Design Guide to BS 5950-1: 2000”, Penerbit UTM, ISBN 978-983-52-0730-3, 2010.

 

  1. Bala Muhammad and Mohammad Ismail, Impact of Natural Rubber Latex on Engineering Properties of Concrete, LAP LAMBERT Academic Publishing, ISBN 978-3-659-16578-8, 29-08-2012.

 

 

MONOGRAPH

 

  1. Development of a New Rapid Technique to Sense Corrosion of Reinforcement, ISBN 978-967-353-210-0

 

  1. Pembangunan Sistem Perkadaran Bagi Tujuan Penilaian Keadaan Struktur Marin, ISBN 978-967-353-371-8

 

  1. Repair Index Method to Evaluate the Condition of Reinforced Concrete Structures Exposed to Reinforcement Corrosion, ISBN 978-967-353-851-5

 

  1. Strengthening of Bolted Shear Joint in Ferrocement Construction, ISBN 978-967-353-852-2

 

BOOK CHAPTER

 

  1. Mohammad Ismail, “Corrosion of Steel in Concrete”, Penerbit UTM, ISBN 978-983-52-0570-5, 2008.

 

  1. M Ismail, PB Raja, AA Salawu, ‘Development of Deeper Understanding of Green Inhibitors for Corrosion of Reinforcing Steel in Concrete’ Handbook of research on recent developments in materials science, ISBN13: 9781466681835, EISBN13: 9781466681842, 2015.

 

 

PLENARY LECTURE / KEYNOTE ADDRESS

 

 

  1. Mohammad Ismail, ‘Innovative Research on Industrial by-product for Sustainable Development’, International Conference on Energy and Environment, icee 2009, organized by Quaid-e-Awam University of Engineering and Science & Technology, Nawabshah, PAKISTAN, 26-28 Feb. 2009.

 

  1. Mohammad Ismail, Innovative Research on Waste and Green Materials for Sustainable Development, International Congress on Science and Engineering Research (ICSER), Nanyang Technical University, Singapore. November 17-18, 2015.

 

 

INVITED/GUEST SPEAKER

 

  1. Mohammad Ismail, Bala Muhammad, Nur Aiza Mohamad,Effect of Latex Concentrate on Sulphates Resistance and Water Absorption of Concrete”, Proceeding 6th Asian Symposium of Polymer in Concrete (ASPIC 2009), ISBN 978-7-5608-4174-8, Organized by Key Laboratory of Advanced Civil Engineering Materials, Tonji University, Shanghai CHINA, 29-30 Oct. 2009– (INVITED PAPER)

 

 

REFEREED CONFERENCES

 

  1. E. Ismail, M. Ismail and M. Ohtsu, “Non Destructive Evaluation of Corrosion Activity in Reinforced Concrete”, Proceeding Proceedings The fourth International Structural Engineering and Construction Conference, ISBN 978-0-415-45756-9, Melbourne AUSTRALIA, 26-28 Sept. 2007.

 

  1. Saand, Mohammad Ismail and S.R. Sumadi, “Load Carrying Capacity of Pre-Damaged Reinforced Concrete Beams Repaired with Polymer-Modified Mortar”, Proceedings 12th International Congress on Polymers in Concrete (ICPIC 07), Chuncheon, KOREA, 27-28 Sept. 2007.

 

  1. Musarrat Ullah Khan Afridi, Asharf Ali, Abdullah Saand, Mohammad Ismail and Salihuddin R. Sumadi, “Successful Usage of Prepackaged Polymer-Modified Cementitious Materials in Efficiency Improvement and Rehabilitation of Water Retaining Structures”, Proceedings 12th International Congress on Polymers in Concrete (ICPIC 07), Chuncheon, KOREA, 27-28 Sept. 2007.

 

  1. Mohammad Ismail, Rosly Abd Rahman and Erica Dina, “Corrosion Detection of Embedded Steel in Concrete”, Proceedings 11DBMC International Conference on Durability of Building Materials and Components, ISBN 978-975-561-329-1 (V.4) Organised by Istanbul Technical University, Istanbul, TURKEY, 11-14 May, 2008.

 

  1. E. Ismail, Mohd Warid Hussin and Mohammad Ismail, “High Performance Blended Cement Concrete in Malaysia”, Proceedings 8th. International Symposium on Utilization of High Strength and High-Performance Concrete, Organized by Japan Concrete Institute, Tokyo, JAPAN, 27-29 Oct. 2008.

 

  1. Mohammad Ismail, M. E. Ismail, Nordin Yahaya and Esah Hamzah, “Corrosion Behaviour Of Dual-Phase Steel In Concrete”, Al-Azhar Engineering Tenth International Conference (AEIC 2008), Organized by Al-Azhar University, Cairo Egypt 24-26 Dec. 2008.

 

  1. E. Ismail, Mohammad Ismail and Nurul Ain, “Tensile Strength Behaviour of Concrete Modified with Ready-Mixed Polymer Modified Mortar”, Al-Azhar Engineering Tenth International Conference (AEIC 2008), Organized by Al-Azhar University, Cairo EGYPT 24-26 Dec. 2008.

 

  1. Mohammad Ismail, Bala Muhammad, M. E. Ismail and A.A. Yussuf,Clonal Classification Impact on Physical and Mechanical Properties of Natural Rubber Latex – Modified Concrete”, Proceedings 7th International Conference on Composite Science And Technology ISBN 978-9948-427-11-7, Organized by: Institute of Materials Systems College of Engineering American University of Sharjah, UNITED ARAB EMIRATES, 20-22 Jan 2009.

 

  1. A. Mansur, Mohammad Ismail, and Y. J. Lau,Shear Strength Prediction of Ferrocement Using Artificial Neural Network”, Proceeding of the 9th. International Symposium of Ferrocement and Thin Reinforced Cement Composite, ISBN 978-979-1165-93-8, Bali, INDONESIA, 18-20 May 2009.

 

  1. A. Mansur, Mohammad Ismail and C.E. Chiong,Strengthening Of Bolted Shear Joints In Industrilised Ferrocement Construction”, Proceeding of the 9th. International Symposium of Ferrocement and Thin Reinforced Cement Composite, ISBN 978-979-1165-93-8,, Bali, INDONESIA, 18-20 May 2009.

 

  1. Mohammad Ismail, Bala Muhammad, M. Hamidi Hadi M. Zabidin, “Effect of Latex Concentrate on the Strengths and Drying Shrinkage of Concrete”, Proceeding 7th Asia Pacific Structural Engineering and Construction Conferences 2009 (APSEC 2009), ISBN 978-983-42613-8-2 (Vol II), Langkawi MALAYSIA, 4-6 Aug. 2009.

 

  1. Mohammad Ismail, Lau Sim Keok, Zaiton Majid and Mohamed E. Ismail, “Utilization of Waste Material in Manufacturing of Construction Product”, Proceeding 7th Asia Pacific Structural Engineering and Construction Conferences 2009 (APSEC 2009), ISBN 978-983-42613-8-2 (Vol II), Langkawi MALAYSIA, 4-6 Aug. 2009.

 

  1. E. Ismail, Nurul Ain Hanina and Mohammad Ismail, “Concrete Compressive Strength with Prepacked Polymer Modified Cementitious Mortar as Modifier”, Proceeding 7th Asia Pacific Structural Engineering and Construction Conferences 2009 (APSEC 2009), ISBN 978-983-42613-8-2 (Vol II), Langkawi MALAYSIA, 4-6 Aug. 2009.

 

  1. Jamaluddin M Yatim, Mohammad Ismail, Wan A.W.A Rahman and Chiew V. Yaw, “Performance of Concrete Containing Effective Microorganisms (EM) under Various Environments”, Proceeding 7th Asia Pacific Structural Engineering and Construction Conferences 2009 (APSEC 2009), ISBN 978-983-42613-8-2 (Vol II), Langkawi MALAYSIA, 4-6 Aug. 2009.

 

  1. Siti Fatimah A.R, Mohammad Ismail, Norhazilan Md.Noor, Hazri Bakhtiar, “Embedded Capacitance Corrosion Sensor For Measuring Corrosion Potential of Rebar” , Proceedings of  3rd  Engineering Conference on Advancement in Mechanical and Manufacturing for Sustainable  Environment, EnCon2010, Kuching, Sarawak, Malaysia. 14-16 Apr. 2010

 

  1. Mohammad Ismail, Bala Muhammad, Jamaluddin Mohd Yatim, Ainul Haezah Noruzman and Yong Woo Soon, “Behavior of Concrete with Polymer Additive at Fresh and Hardened States”, Proceeding the twelth East Asia Pacific Conference on Structural Engineering & Construction (EASEC-12), Hong Kong Special Administrative Region, China. 26-28 Jan. 2011. (Scopus)

 

  1. Ismail, M., Muhammad, B., Yatim, J.M., Noruzman, A.H., Soon, Y.W, Behaviour of Concrete with polymer additive at fresh and hardened state, Procedia Engineering, 14, pp 2230-2237, 2011 (Scopus)

 

  1. S. Abdulrahman, Mohammad Ismail, Mohammad Sakhwat Hussain, “Eco-friendly Corrosion Inhibitor for reinforced concrete”, Proceeding of 3rd. International Congress on Green Process Engineering, Organised by Universilty Malaya and Universite de Toulouse, Kuala Lumpur Malaysia, 6-8 Dec. 2011.

 

  1. Mohammad Ismail, Siti Fatimah A.R., Muhammad B., Noor, N. Md., Bakhtiar, H. “Embedded sensor for detecting corrosion of reinforcement in concrete”, Advanced Materials Research, 250-253, pp.1118-1123. (Scopus)

 

  1. Mohd Azrul Abdul Rajak, Zaiton Abdul Majid, Mohammad Ismail, “Electrical Conductivity Measurement in Evaluating Pozzolanic Activity of Palm Oil Fuel Ash”, Proceeding 8th Asia Pacific Structural Engineering and Construction Conferences 2012 (APSEC 2012), ISBN: 978-983-44826-1-9, Surabaya, INDONESIA 2-4 Oct. 2012.

 

  1. Mohammad Ismail, Hassan Ibrahim Ogiri, Thayalan Balakrishnan, “Corrosion Characterisation Of Reinforced Concrete Structures Exposed To Marine Environment”, Proceeding 8th Asia Pacific Structural Engineering and Construction Conferences 2012 (APSEC 2012), ISBN: 978-983-44826-1-9, Surabaya, INDONESIA 2-4 Oct. 2012.

 

  1. Mohammad Ismail and Taliat Ola Yusuf, “Extraction of Alkaline Solution from Cocoa Pod Husk for Synthesis of Geopolymer”, Research, Development, and Practice in Structural Engineering and Construction, Edited by Vanissorn Vimonsatit, Amarjit Singh, and Siamak Yazdani, Copyright_c 2013 by Research Publishing Services :: rpsonline.com.sg. ISBN: 978-981-08-7920-4 :: doi: 10.3850/978-981-08-7920-4 M-47-0375 ASEA-SEC-1 The First Australia and South-East Asia Structural Engineering and Construction Conference Curtin University, Perth, Australia, Nov 28 – Dec 02, ISBN-13: 978-981-073677-4 ISBN-10: 981-07-3677-02012ASEA-SEC-1 The First Australia and South-East Asia Structural Engineering and Construction Conference,

 

  1. Mohammad Ismail, Muhammad Aamer Rafique Bhutta and Ainul Haezah Noruzman, “Laboratory Evaluation of Polymer Modified Mortar Incorporating Waste Latex Paint Effluent”, Research, Development, and Practice in Structural Engineering and Construction, Edited by Vanissorn Vimonsatit, Amarjit Singh, and Siamak Yazdani, Copyright_c 2013 by Research Publishing Services :: rpsonline.com.sg. ISBN: 978-981-08-7920-4 :: doi: 10.3850/978-981-08-7920-4 M-47-0375. ASEA-SEC-1 The First Australia and South-East Asia Structural Engineering and Construction ConferenceCurtin University, Perth, Australia, Nov 28 – Dec 02, ISBN-13: 978-981-073677-4 ISBN-10: 981-07-3677-02012

 

  1. Nur Hafizah, A.K., Jamaludin, M.Y., Bhutta, M.A.R., Husin, M.W.c, Mohammad Ismail, Azman, M. Tensile Properties of Kenaf Fiber Reinforced Polymer Composites. The 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013). 16-17th April 2013. Universiti Teknologi Malaysia, Johor Bahru, Malaysia, pp. 474-478.

 

  1. Nurul Hidayah Roslan, Taliat Ola Yusuf, Mohammad Ismail, Evaluation of By-Product from Steel Industry as Cement Replacement.  The 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013). 16-17th April 2013. Universiti Teknologi Malaysia, Johor Bahru, Malaysia, pp. 474-478.

 

  1. Mohammad Ismail, Innovative Research on Waste and Green Materials for Sustainable Development,  ConCERN 2014, Conference for Civil Engineering and Research Network, 4-5th. Nov. 2014, Faculty of Civil and Environmental Engineering, Institute Technology Bandung, Indonesia.

 

  1. Mohd Azrul Abdul Razak, Zaiton Abdul Majid and Mohammad Ismail, ‘Morphological characteristics of cement pastes incorporating nano-palm oil fuel ash’, 2nd. International Materials, Industrial and Manufacturing Engineering Conference, MIMEC2015, (ISSN 2351-9789), 4-6 Feb. 2015, Bali, Indonesia, Procedia Manufacturing 2015.

 

  1. Mohanadoss Ponraj, Amirreza Talaiekhozani, Rosli Mohamad Zin, Mohammad Ismail, Muhd Zaimi Abd Majid*, Ali Keyvanfar, Hesam Kamyab, Bioconcrete Strength, Durability, Permeability, Recycling and Effects on Human Health: A Review. Proc. of the Third Intl. Conf. Advances in Civil, Structural and Mechanical Engineering- CSM 2015. Copyright © Institute of Research Engineers and Doctors, USA .All rights reserved. ISBN: 978-1-63248-062-0 doi: 10.15224/ 978-1-63248-062-0-28).

 

 

REFEREES

 

1. Profesor Ir. Dr. Mohd Saleh Jaafar

Faculty of Engineering

Universiti Putra Malaysia

UPM 43400, UPM Serdang

Selangor

e-mail: msj@eng.upm.edu.my

4. Profesor Dr. Kamarudin Mohd Yusof

Department of Civil & Structural Engineering

Faculty of Engineering and Built Environment

Universiti Kebangsaan Malaysia

43600 Bangi, Selangor

e-mail: drkmy@vlsi.eng.ukm.my

2. Profesor Ir. Dr. Wan Hamidon Wan Badaruzzaman

Department of Civil & Structural Engineering

Faculty of Engineering and Built Environment

Universiti Kebangsaan Malaysia

43600 Bangi, Selangor

e-mail: whamidon@vlsi.eng.ukm.my

5. Profesor Ir. Dr. Mohd Zamin Jumaat

Department of Civil Engineering

Faculty of Engineering

Universiti Malaya

50603 Kuala Lumpur

e-mail: zamin@um.edu.my

3. Profesor Ir. Dr. Mahyuddin Ramli

Pusat Pengajian Alam Bina

Universiti Sains Malaysia

11800 Minden, Pulau Pinang

Email: mahyudin@usm.my

6. Profesor Dr. Hilmi Mahmud

Department of Civil Engineering

Faculty of Engineering

Universiti Malaya

50603 Kuala Lumpur

e-mail: hilmi@um.edu.my

 

 

 

 

 

 

 

Update on 30 Mei 2016